E-bike chassis dynamometer testing machine
Meet the standard:
EN 15194
ISO 4210
UL 2849
Product Introduction:
Electric bicycles are complex systems involving mechanical, electrical, and control components. Evaluating their performance and compliance with safety and efficiency standards requires precise and repeatable testing that is difficult to achieve in outdoor environments due to varying weather, traffic, and road conditions. An Electric Bicycle Chassis Dynamometer System addresses this need by providing a consistent platform for comprehensive e-bike testing.
The instrument is used in laboratories for:
Measuring motor efficiency, power output, and torque characteristics of e-bikes.
Evaluating battery range and energy consumption under simulated riding conditions.
Simulating various road loads, inclines, and driving cycles.
Testing electromagnetic compatibility (EMC) by providing a stable environment.
Conducting endurance and durability testing on e-bike components.
Verifying compliance with national and international standards for e-bike performance and safety.
Research and development of new e-bike designs, motors, batteries, and control strategies.
Quality control and validation during the e-bike manufacturing process.
Product Advantages:
Provides a highly controlled and repeatable testing environment, eliminating variables from outdoor riding.
Enables precise and accurate measurement of critical e-bike performance parameters.
Allows for rapid and efficient testing for product development and quality control.
Enhances safety by performing tests in a controlled indoor setting rather than on roads.
Supports compliance testing against various national and international e-bike standards.
Facilitates detailed data acquisition and analysis for in-depth performance evaluation.
Offers versatility to simulate a wide range of riding conditions and custom test cycles.
Accommodates various e-bike types and sizes through adjustable mounting systems.
在线联系供应商
Other supplier products
 |
In situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
 |
Electrode tortuosity tester & diaphragm ion conductivity tester | Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit... |
 |
Negative pressure tester for medical syringes | Negative pressure tester for medical syringes - Other test instrument - standard Standards: YY0053-2008, GB 15810-2019 single-use sterile syrin... |
 |
Glove cutting resistance tester | Product Information: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure ... |
 |
Closed - Space Tester for Aerosol Sprays | Product Features 1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
