Spinal Internal Fixation System Component Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standard
YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connectors.
ASTM F2193-18 (International): Defines methodologies for evaluating the static and fatigue performance of spinal implant constructs.
ISO 12189-1: Additional compliance for mechanical testing of spinal implant components under physiological loading.
Product Advantages
Universal Testing Compatibility: Modular design accommodates screws (3.5–7.5 mm), plates (20–100 mm length), and rods (4.5–6.5 mm diameter).
Multi-Axis Loading: Simultaneous axial/torsional/shear loading replicates complex in vivo stresses.
High-Frequency Stability: 0.1–15 Hz dynamic control with ±0.05% force accuracy.
Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with protein skimmer.
AI-Powered Analytics: Machine learning algorithms predict failure modes from initial test cycles.
Regulatory Compliance: Pre-loaded protocols for FDA/CE submission requirements.
Product Features
Electromagnetic Servo Actuators: 50 kN axial/25 Nm torsional capacity with programmable load ratios (R=0.1–10).
6-DOF Kinematic System: Replicates flexion/extension, lateral bending, and axial rotation (±20° range).
Dynamic Load Control: 0.1–15 Hz frequency range with programmable waveforms (sine, square, random).
Thermal-Mechanical Chamber: -20°C to +50°C temperature control with 10–95% RH humidity.
High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.
Safety Suite: Emergency stop, overload clutches, and laser-based specimen breakage detection.
Accessories
Spinal Component Fixture Kit:
Self-centering screw clamps (3.5–7.5 mm)
Plate/rod bending jigs with laser alignment
Universal connectors for hybrid constructs
Thermal-Mechanical Chamber:
25L capacity with rapid cooling/heating (15°C/min)
316L stainless steel interior with HEPA filtration
BioTest Pro Software:
Automated FEA validation and fatigue limit calculation
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
Operator Kit:
Calibrated torque wrench set (0.5–50 Nm)
Specimen alignment gauges (ASTM F2193 compliant)
Calibration Bundle:
NIST-traceable force/torque calibration weights
Angular encoder verification tool
Safety Kit:
Laser safety curtains
Acoustic enclosure with 30 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Axial Force | ±50.000 N (50 N resolution) |
| Max. Torsional Moment | ±25 Nm (0.1 Nm resolution) |
| Angular Range | ±20° (0.001° resolution) |
| Frequency Range | 0.1–15 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Temperature Control | -20°C to +50°C (PT1000 sensors) |
| Humidity Control | 10–95% RH (non-condensing) |
| Data Acquisition | 100 kHz sampling rate (16-bit resolution) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 3.500W |
| Dimensions (W×D×H) | 2.200 × 1.600 × 2.300 mm |
| Weight | 1.400 kg (including environmental chamber) |
| Noise Level |
在线联系供应商
Other supplier products
 |
Digital Automatic pH Analyzer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fully Automatic pH Tester for Textiles and Leather Products is designed t... |
 |
Dry and Wet Sand Rubber Wheel Abrasion Test Apparatus | ASTM G65 Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Dry and Wet Sand Rubber Wheel Abrasion Test Apparatus is mainly used to t... |
 |
Low cost Mechanical load testing machine for photovoltaic modules | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mechanical Load Testing Machine for Photovoltaic Modules is designed to v... |
 |
Custom Leakage negative pressure tester for infusion device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for leakage testing of medical infusion devices in the ... |
 |
Engine Blow-By Gas Measurement Test Rig | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications determination of oil content in blow-by on the engine test stand evaluation ... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
