STD IPX7 Machine Waterproof Test Chamber
Product Introduction
Test the product waterproof performance in the soaking environment (water depth 1 meters).
Through the test ,check whether the product waterproof level meet the requipments,so that the product
design, R & D and factory inspection use.
Characteristics
1. suitable for IPX7 waterproof grade test of the product.
2. this box allows the maximum water depth of 1.2 meters, the bottom area: 800*800mm. (Customizable)
3. double-layer structure: the inner layer of SUS304# stainless steel plate high-precision integral sub-arc welding forming, to ensure long-term use of no rust, no water; the middle of the two layers with 40 square steel reinforcement to keep the inner box will not be deformed;
C, the outer layer is welded with hairline stainless steel plate, the stainless steel plate is wrapped, the appearance has no solder joints, and the overall appearance is beautiful.
4. Install the water inlet and outlet pipes below the water tank.
5. the observation window is made of 12mm tempered glass bonding, can clearly observe the test situation of the sample.
6. stainless steel frame with load casters and foot cups, easy to move and fix.
7. stainless steel ruler accurately display water level.
A stainless steel hook is welded to the top of the inner box to facilitate users to take and place test samples.
8.The bathhave continuous water agitation facility
Main Technical Parmeters
| Machine Size | L960*D900*H1360mm(With Castors) |
| Inner Size | L800*W800*H1200mm |
| Water Max.Depth | 1.2m |
| Inner Thickness | 1.5mm |
| Perspective Window | Stalinite(Thickness:12mm) |
| Perspective Window Width | 200mm |
| Water level control Mode | Water/drain valve by manual adjustment |
| Water Level Display | Stainless steel ruler(Accuracy 1mm),Horizontal visual |
| Machine Material | Stainless steel 304# |
在线联系供应商
Other supplier products
 |
Shoe heat insulation testing machine -- sand bath | Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard for... |
 |
Stain resistance tester for architectural coatings | Product Introduction The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often ... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro... |
 |
Sharp edge tester | Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ... |
 |
Qinsun SUNTEST XXL+ | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The exp... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
