Carbon Black Content Tester
A Carbon Black Content Tester is an instrument used to measure the carbon black content in materials.
Applications
The Carbon Black Content Tester has wide applications in industrial production, scientific research, and quality control. In industrial production, it can be used to quantitatively analyze the carbon black content in raw materials, thereby controlling the raw material ratio and product quality during the production process. In scientific research, it can be used to quantitatively analyze the carbon black content in new materials, thus understanding the physical and chemical properties of the materials. In quality control, it can be used to quantitatively analyze the carbon black content in products, thereby ensuring the quality and safety of the products.
Standards
GB 13021-1991: Determination of carbon black content in polyethylene compounds.
GB/T 2951.41-2008: Test method for carbon black and ash content in cables and wires.
International Adaptability: Configurable for ASTM D1603 and ISO 6964 equivalency upon request.
Features
Pyrolysis System:
Split-Tube Furnace: Rapid heating (0–1.000°C in 20 minutes) with silicone carbide elements.
NiCr-Ni Thermocouple: ±0.5°C accuracy across 300–1.000°C range.
Gas Control:
Mass flow controllers for nitrogen (1–5 L/min) and air (0.5–2 L/min).
Built-in leak detector with audible/visual alerts.
Weighing Module:
Integrated analytical balance (0.01mg resolution) with anti-vibration table.
Auto-tare function for crucibles and samples.
Data Management:
100-test memory with date/time stamping.
USB/RS-232 ports for PC connectivity and LIMS integration.
Safety Suite:
Emergency off button with E-Stop loop monitoring.
Fume extraction port for lab ventilation systems.
Technical Parameters
| Specification | Details | |
|---|---|---|
| Temperature Range | 300°C to 1.000°C (max. operating temp.) | |
| Temperature Accuracy | ±0.5°C (±0.1°C with calibration kit) | |
| Heating Rate | 0–50°C/min (adjustable) | |
| Gas Purity | 99.99% N₂ (inert) / Ambient air (combustion) | |
| Sample Capacity | 1–5 samples per run (10g max. per sample) | |
| Power Supply | 220V/50Hz (110V/60Hz available) | |
| Dimensions (W×D×H) | 500mm × 400mm × 450mm | |
| Weight | 45 kg (net) |
Accessoriess
Standard Kit:
10 × Porcelain crucibles (ISO 6964 compliant).
Silicone tubing set with quick-connect fittings.
Software Bundle:
LabCarbon Pro™: Automated data reduction with GPC/SEC integration.
CloudQC: Remote monitoring for 21 CFR Part 11 compliance.
Safety Upgrades:
Fume scrubber with activated carbon filter.
Explosion-proof enclosure (ATEX Zone 2).
Calibration Services:
Annual recalibration with NIST-traceable certificate.
Consumables:
50 × Disposable sample boats.
1L Nitrogen purity indicator solution.
Test Procedures
1. Sample Preparation
Weigh 1g of the sample to be tested and place it in the combustion boat according to the test procedure.
2. Instrument Warm-up
Turn on the instrument, purge with nitrogen for a few minutes, and set the heating program.
3. Sample Placement
Place the prepared sample into the quartz tube.
4. Start Testing
Press the test button. Remove the sample after the test is completed.
5. Data Processing
Calculate the test results according to the formula.
在线联系供应商
Other supplier products
 |
Battery Slurry Resistance Tester | The Battery Slurry Resistance Tester is a precision testing system designed to measure the resistivity of high-solid battery slurries and conductiv... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro... |
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
 |
Safety Helmets Against Molten Metal Splashing Tester | Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (Draft Standard) GB 2811-2019: Head Protection – G... |
 |
Air Permeability Tester STD- F8 | The Air Permeability Tester is designed to quickly and accurately measure the breathability and permeability of a wide range of samples, from those... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
