Flame Durability Testing Machine,Continuous Burning Time Tester for Liquids,ISO 9038
Introduction
When the hazardous liquid is heated to 0.5 ºC and 75 ºC, flame durability tester is used to evaluate the continuous burning time. When the subject material is heated and exposed to fire according to test conditions, this instrument can test its continuous burn time.
Standards
(chemical registration, evaluation, authorization, restriction)• ISO 9038: liquid continuous combustion performance test.
Features
• K- type thermocouple to measure the temperature automatically.
• Temperature controller automatic to control the temperature.
• Timer recording flame continue burning time.
• Flame can be moved to the sample position.
• Portable butane gas can be stored in the special gas tank fixture;
• Pressure device can automatically measure the current barometric pressure
• Solenoid valve to control the gas switch.
• Imported gas control valve control airflow to adjust the flame length.
Test results judge condition
• Tobe testthree times. Required to record following points:
a) Check the ignition test sample or test position when the flame moves to its continuous combustion conditions
b) When the flame is placed in the test position to be tested, check whether the sample is ignited. If ignited, then the flame is returned to the "off" position, then start the time record for combustion duration of the test specimen
• If the sample is non-sustained combustion test is deemed passed, if it is sustained combustion type, so even if the failure. If any test sample that contains one of the following, it will be defined as a particular heating time duration of combustion.
• If the test sample from the test base of 45 degrees and it is ignited, the need to observe and record its combustion performance.
• When the test sample is ignited, and the test flame is moved from the test base 45 degrees position, if sustained burn more than 15 seconds, you need to observe and record the combustion performance.
Specification
| Model | STD- ISO 9038 |
| Size | 500(W) x 300(D) x 400(H)mm |
| Table size | 1.000(W)×600(D)×800(H)mm |
| Power | AC 220V, 50/60Hz, 10A |
| Weight | 20kg |
| Instructions | Available |
| Exhaust | Minimum 50L / s |
| Other Requirements | Butane, vacuum cleaners (optional) |
在线联系供应商
Other supplier products
 |
Scratch tester STD-KK02 | Product introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Film impact Tester (Gardner) | The Film Impact Tester (Gardner) is designed to evaluate the impact resistance of coatings and paint films. It determines the degree of damage such... |
 |
Fiber Blend Ratio Test machine | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Model button battery in situ expansion test system | System overview: The in situ expansion testing system of model bonded battery adopts high-precision displacement sensor and high-stability structu... |
 |
Tag Closed Cup Auto Flash Point Analyser, ASTM D 56，Automated Abel Closed Cup Flash Point Tester | Introduction: STD Closed Cup Auto Flash Point Analyzer fit to the requirements of international standards ISO2719-88. using micro-computer technol... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
