Ct Touch Controller
HX-SZ600-WP86-CCT
LED Sync CCT Controller with Wall-panel remote control
HX-SZ600-WP86-CCT,Website:, adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED CW+WW lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input and output with four interfaces, including two identical V+ for positive interfaces, the other two for the CW and WW control interface. Meanwhile, you could adjust brightness, color temperatures and various dynamic changes in lighting effects through full-touch wall panel remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.Product Features
●Designed for CW+WW constant voltage LED lights, Working voltage DC12-24V.
●Two channels output, Max. load current: 2CH*8A; Max. load power: 192W/12V; 384W/24V.
●Adopts full-touch wall panel remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters. The working voltage of wall-panel is AC90-265V.
●Structure/dimension/installation of the wall panel according to the 86-type European standards.
●Memory function, each time power-on reserve the mode which stop in the last power-down.
●Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
●Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
●Warranty of this product is one year, exclude the artificial situation of damaged or overload working.Technical Parameters Controller Working temperature-20-60℃Supply voltageDC12V-24VStatic power consumption<1WConnecting modecommon anodeGrayscale256 levelsSpeed stage100 gradeExternal dimensionL91*W88*H24 mmPacking sizeL102*W102*H66 mmNet weight280gGross weight300gOutput2 channelsOutput current≤8A(each channel)Mode7Remote distanceUp to 20MPWM frequency433.92MhzMemory functionsupportMax. Output power12V192W, 24V384WRemote control Ambient temperature0-45℃Working voltageAC90-265V(50/60Hz)Standby power0.2WWorking power2WNet weight130gRF frequency433.92MHzDimension86*86*34mmRF distance≤20mStructure86-type European standardInterface SpecificationsConnection：V+→COM、CH1→CW、CH2→WW、CH3→NC (no connect)；Direction for use
●Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power；
●Adopts RF full touch wall-panel remote control, with one dimming ring and 5 function buttons.
●The signal light flash-- represents the signal has been sent well;
The function of buttons are shown as below:The 7 standard modes as below:NOPatternsRemarks1Static WWBrightness is adjustable2Static CW3Static CW+WW4CW and WW flash alternatelySpeed is adjustable, brightness is unadjustable5CW and WW fade alternately6CW and WW flash7CW and WW fadeTips: Receiver can be controlled by any one the same remote as factory default; the wall-panel remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.
Matching code operation
If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:
1.Step 1: Pressing key "mode" and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
2.Step 2: Continuously to press the key "ON" for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.
3.Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.
4.If not, please re-operate from step 1 to 2.Typical Applications Application Circuit 1:Application Circuit 2:( Synchronization function with network Line ）Product information for placing order Product nameItem numberLED Sync Controller with Wall-panel remote control-CCTHX-SZ600-WP86-CCT
Other supplier products
|
|
|
Shenzhen Hoion Lighting Co.,Ltd is a professional 6803 LED controller company with productive factory, we are the best 6803 LED controller manufact... |
|
|
|
Shenzhen Hoion Lighting Co.,Ltd is a professional RGB LED amplifier company with productive factory, we are the best RGB LED amplifier manufacturer... |
|
|
|
Muti Color Led Controller,IR LED Controller |
|
|
|
Shenzhen Hoion Lighting Co.,Ltd is a professional dual temp controller company with productive factory, we are the best dual temp controller manufa... |
|
|
|
Shenzhen Hoion Lighting Co.,Ltd is a professional wireless RGB LED strip 44 key ir remote controller company with productive factory, we are the be... |
供应产品
Same products
