S Type Socket Bend
S Type Socket Bend
The T socket fittings are according to ISO2531, BSEN545/598 BS4772 .They are mainly used for transferring the drinkable water, waste water and for irrigation. The size is from DN50mm-DN2000mm .Internal Ling with port land cement mortar according to ISO4179, external coating with Zinc plus bitumen according to ISO8179 or Fusion Bond Epoxy coating both internal and external. The pressure rate is PN10 PN16 PN25 .SBR or EPDM Rubber Rings is available.Socket spigot tee.
Ductile iron Fittings include Double socket Bend, Socket Elbow, Flange Socket, Double socket tee, Socket Spigot tee, T Socket Fittings, Double Socket Reducer, Double Socket Duckfoot bends, All -Socket tees with 45 ° angle banch, Double Socket Tee with Flange tee.
|
Inspection |
SGS, BV, third party inspection |
|
Material |
Ductile Cast Iron GGG50, QT500-7/450-10,FGS500-7,420-12 |
|
Standard |
ISO2531 BS EN545 EN598 BS4772 DIN2501,GBT13295 |
|
Flange drilled |
ISO7005-2,BS4504, EN1092-2, DIN2501 |
|
Pressure |
PN10, PN16,PN25 |
|
Specification |
DN50 to DN2000, K12/14 |
|
Joints type |
Flange, Typon joint(push on joint); Bolted Gland K typeJoint |
|
Application |
water supply project, drainage, sewerage, Irrigation ,water pipeline |
|
Certificates |
ISO2531:2009, EN545:2010,EN598 ISO9001, ISO14001,ISO18001. |
|
Surfce Inside |
Portland Cement mortar lining,bitumen paint, epoxy paint/powder |
|
Surface Outside |
Epoxy paint, bitumen paint, epoxy powder coating |
|
Accessories: |
SBR or EPDM Rubber Rings are available |
|
Packingmethods: |
woodencase/palletwithplasticlayer,oraspercustomer'srequirements, |
ZhuCheng Three—dimensional Pipeline Co., Ltd.
在线联系供应商
Other supplier products
 |
Stepped couplings | Ductile iron Steped coupling are according to ISO2531, BSEN545/598.They are mainly used for transferring the drinkable water, waste water and for ... |
 |
All flanged Tee ISO2531 | The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used for transferring the drinkable ... |
 |
K type Socket Bend 22.5° | K type Socket Bend 22.5° Ductile iron K type Bolt Gland Fittings are according to ISO2531, BSEN545 / 598.They are mainly used for transferring ... |
 |
Double Socket tees with flange branch | Double Socket tees with flange branch Ductile iron K type Bolt Gland Fittings are according to ISO2531, BSEN545/598.They are mainly used for transf... |
 |
Flange Socket | Flange Socket The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used for transferring ... |
Same products
|
|
S Type Socket Bend | 卖方: ZhuCheng Three-dimensional Pipeline Co., Ltd | S Type Socket Bend The T socket fittings are according to ISO2531, BSEN545/598 BS4772 .They are ... |
