Super Cell Rubber Fender
Super Cell Rubber FenderThis is a high performance rubber fenders,Website:, which have high Energy Absorption,while keeping Reaction Force to a minimum.It have a cylindrical elastomeric section with steel mounting plates permanently bonded at each end. Under axial loading, the cylindrical section buckles radially. This controlled, multi-directional dispersion of energy combines the high absorption efficiency of the buckling column with a stable geometric shape.Feature:1.Compare with general cell rubber fender, its rated compression raised 5%, the reaction force is basically the same, while the energy absorption nearly rase 17%.The value of unit reaction force/energy absorption (E/R-H) nearly rise 15.2. With front panel in the margin of fender.It can lower the pressure of the side board of the ship, the pressure can be controlled at below 200KN/m², it specially apply for the berthing of large model ship.3. UHMW-PE is set in the front of panel, it can reduce the friction factor between ship and fender,and lower the shear power while the ship berthing,and raise the life of fender using.4.the super cell fenders have more reasonable structure, high performance and good durability.5.Higher Energy Absorption with lower Reaction Force.6.Excellent performance at large berthing angles7.Low friction UHMW pads on frontal frame uniform deformation under shear load extends life.8.Suitable for large and middle oil dock,coal doaks etc.Specification Sizes:Specification
(mm)H h D1 D2 Holes Φd JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA JR--AA Dynamics Performance :(1): High reaction force; High reaction force; Standard reaction force; Low reaction force(2): Performance tolerance: ±10%
Other supplier products
|
|
Roller Type Rubber Fender |
Rolling Rubber Fender
The Rolling fender is commonly used on the berth corners and dock entrances, also widely installed along the walls of dry ... |
|
|
Inflatable Life Jacket |
This inflatable life jacket is made according to the European standard EN396/ Al, and with reference to the international standard MSC81(70)the rel... |
|
|
D Type Rubber Fender |
D Type Rubber FenderSmall size of ruber fender bottom and a line of erection bolt is particularly suitable for frame type wharf and shore protectio... |
|
|
Marine Copper Propeller |
The propeller made of copper have less rotating mass than other materials, which equates to faster acceleration. It is much more effective propell... |
|
|
A Type PVC Fender |
A type pvc fender, also called pear type pvc fender. It is made by high quality pvc material, with strong resistance , corrosion resistant ability,... |
供应产品
Same products
