- It is an efficient and multifunctional groundwater drilling equipment, which can be used for drilling water wells, agricultural irrigation wells, geothermal wells and other wells. It is especially suitable for water intake projects in mountainous areas and rock formations.
- The machine can drill holes in different formations (rock layers, mud layers, sand layers), and the maximum aperture can reach 300mm.
- This machine adopts high-torque hydraulic motor power head and brand diesel oil, and the hydraulic control system adopts large-diameter hydraulic cylinder. The brand diesel is protected by a two-stage air filtration system, and the clean air from the air compressor can also be used directly.
- Unique bump design and centralized control operating system are easy to maintain and operate.
- This machine adopts excavator crawler chassis, which has high off-road performance and can also be installed on trucks, with stronger mobility.
- Two gear rotation and feed speed to make it work in soil and rock layers.
- Dual systems can be installed: 1. Air power system with air compressor 2. Mud pump system with mud pump
Optimal Hole Range: φ140-350
Hole depth.Max: 450m
| The weight （T） | 9.2 |
|---|---|
| The hole diameter （mm） | 140-350 |
| Drilling depth （m） | 450 |
| One-time advance length （m） | 6.6 |
| Walking speed （km/h） | 2.5 |
| Climbing angles （Max.） | 30 |
| Equipped capacitor （kw） | 110 |
| Using air pressure （MPA） | 1.7-3.5 |
| Air consumption （m³/min） | 17-36 |
| Swing speed（rpm） | 30-135 |
| The penetrationefficiency （m/h） | 15-35 |
| Drill pipe diameter （mm） | φ89 φ102 |
| Drill pipe length （m） | 1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） | 25 |
| Rapid rise speed （m/min） | 20 |
| Fast feedingspeed （m/min） | 40 |
| Width of loading（m） | 2.8 |
| Hoisting force of winch （T） | 2 |
| Swing torque （N.m） | 7000-9500 |
| Dimension （mm） | 6150×2200×2600 |
| Equipped with hammer | Medium and high wind pressure series |
| High leg stroke （m） | 1.6 |
在线联系供应商
Other supplier products
 |
D480A Φ138-203mm Mining Blast Hole Dth Drilling Rig Drill | The RuiXin D480A is equipped with a high-performance powerpack that delivers robust power output, enabling it to excel in drilling blastholes with ... |
 |
421H Φ90-127mm Surface Mine Infrastructure Construction Integrated Dth Surface Drill Rig | This model is equipped with a larger two-stage screw air end, which meets the requirements for an optimal hole diameter of 90–115 mm. When dr... |
 |
454G Φ152-250mm Surface Mine Infrastructure Construction Integrated Dth Surface Drill Rig | While maintaining high efficiency and low energy consumption, this rig can meet the requirements for blast holes with diameters ranging from 115 mm... |
 |
D490A Φ190-220mm Integrated Dth Surface Drilling Rig For Mining | The RuiXin D490A features a unique double-boom and dual-feed beam design, with an overall weight of 38 tons. Equipped with a high-power eng... |
 |
D545H Φ115-138mm DTH mining Blasthole Drilling Rig | The RuiXin drill rig stands out for its ability to maintain high drilling efficiency while keeping energy consumption low. It perfectly meets the r... |
Same products
 |
YZH stationary hydraulic rock breaker | 卖方: 广西元征行机械设备有限公司 | 一、精准破拆，告别堵卡困扰 从现场作业图中可以清晰看到，元征行固定式液压碎石大臂正高效地对格筛内的矿石进行破碎作业。其核心优势在于： 精准作业：大臂可灵活调整角度与力度，精准打击堵卡的矿石，... |
 |
YZH WHEN1500固定式液压机械臂 | 卖方: 山东伊润基础工程有限公司 | 以下是YZH WHEN1500固定式液压拆除臂的详细介绍，包括其特点、优点和案例研究：YZH WHEN1510固定式底座碎石机臂的特点：智能多模式控制：支持驾驶室操作、无线/有线远程控制、光纤+... |
 |
YZH WHEN1410固定式底座碎石机 | 卖方: 山东伊润基础工程有限公司 | YZH WHEN1410固定式底座碎石机是一种专为采矿、冶金及相关行业大型物料的二次破碎而设计的专用设备。通过更换附件（如液压锤或莲花爪），它可以执行多种功能，包括破碎、抓取和拆除。 WHEN... |
 |
YZH WHEN 1300固定式底座碎石机 | 卖方: 山东伊润基础工程有限公司 | WHEN 1300固定式底座碎石机的特点：智能多模式控制：支持驾驶室操作、远程控制和视频监控。远程控制范围可达10-20km，集成有线/无线双模操作。配合高性能控制器，可实现精确定位和灵活控制。... |
 |
WHE1500 Pedestal Breaker Boom Systems | 卖方: 山东伊润基础工程有限公司 | WHE1500底座式断路器臂架系统的特点： WHE1500底座破碎机臂系统是一种集机械、电气和液压系统于一体的专用二次破碎装置。其设计解决了采矿、冶金和相关行业中的材料堵塞和大块破碎挑战。 采用... |
