Efficiency soybean fast cooling Vacuum Pre-Cooler supplier for Vegetable and Fruit
1.Brand:Wanjia
2.Model: JV-28-2X (8x2 pallets)
3.Application: Vegetables and Fruits
4.Color: Grey
5.Door type: Sliding
6.Temperature control: Manual Control
7.Climate Type: Tropics(T)-subtropical(ST)-Temperate(N)
8.Cooling type:Air Cooling
9.Cooling capacity in weight /per cycle:kg
10.Processing time / per cycle:(20~30)mins
11.Runing power:63kw
12.Total Power :106kw
13.Local supplied power:3P-380V-50Hz
14.Target Temperature:(0~10)0C
15.Ultimate vacuum:≤600Pa
16.Freezing medium:DuPont
17.Valume of vacuum chamer:28m3 x 2
18.Size of inner chamber:2400x5300x2200(mm)
19.Vauum Pump :Leybold
20.Compressor: Bitzer
I.Product General Description
Vacuum cooler is a machine that provide pre-cooling way of vegetable and fruit , cooked food etc .The principle of vacuum cooler is by reducing atmospheric pressure in artificial hermetically sealed chambers. Reducing the atmosphere pressure also reduces the water vapour in the chamber , then the water start to evaporate rapidly, and bring away the heat from vegetable ,fruit and ready food along with evaporation.
Vacuum cooling is the quickest and most cost-efficient cooling system for vegetables, fruits, flowers and more. The vacuum cooling technology can prolong your postharvest products shelf time ,reducing rotting rate , and strongly improve your product quality ,Now is becoming an acceptable investment for almost all vegetable growers!
II.Three different types of doors can be used:
Standard Swing Door:Most simple construction, Manual operation, The ramp for this system is relative long and is mounted inside the cooling chamber.
Horizontal Sliding Door:This electrical driven door is optimal if the cooling skid is placed besides the vacuum chamber(one pallet model and >6 pallet systems )
Upward Lift Door: Hydraulic system, suggested solution for all systems from 2-6 pallets, Easy installation,easy ramp construction.
It is also possible to use two doors in combination with a roller belt system,for maximum efficiency of the loading process limited.
III.Main Components
The size of chamber is defined by the amount of pallets you want to cool at the same time, and their individual
dimensions, the sie of the chamber will decide the number of vacuum pumps to be used ,Vacuum
pump:Dalouton(China),Tongxin(Domestic),Leybold(Germany),Busch(Germany)
The evaporator(water catcher,WanJia special R&D technology),inside the vacuum chamber condenses the water vapour, and ensures only dry air leaves the vacuum chamber towards the pumps, Outside the chamber,the cold medium(R104A) is cooled down by a refrigeration system ,the compressor needed for this heat exchange process issupplied by Bitzer(France) or by Hanbell (China Taiwan)
IV.Three types of condenser systems can be chosen for cooling down the cold medium
Air condenser:the simplest construction,suitable for small system,Easy to integrate
Water condenser:Low cost ,efficient and easy to install ,perfect for most districts climates.
Evaporation condenser:Optimal system for dry climates ,or if water availability is limited
V.Control System:
The specific develop control system ensures that the cooling process works pefect, even with partial loading , the target temperature will be realized quickly , without freezing of the delicate vegetables, the processing data are collected in the system, and all relevant processing parameters can be seen on the display.
The electronics used are from LS(LG group),Control valves&components come from leading suppliers like Danfoss and Leybold. The system can be started with on push the button, the touch screen display is very easy to operate and user friendly,the menu will be supplied in the local language.
Other supplier products
供应产品
Same products
