SKC71 Ultrasonic Cross-hole Automatic Pile Testing System
Purpose Testing of building foundation piles by cross-hole sonic logging; Inspection of concrete defects by ultrasonic method, such as uncompacted, cellular, hole area. Detecting strength of concrete by ultrasonic-rebound combine method Detecting strength of concrete crevice by ultrasonic-rebound combine method Detecting defects of one hole by one trigger two receives Testing dynamic performance of geotechnical investigation, rock, concrete etc Specification: Technical code for testing of building foundation piles JGJ 106-2003 Technical specification of Dynamic pile tests for Highway Engineering JTG/TF81-01-2004 Technical specification for inspection of concrete defects by ultrasonic method CECS21:2000 Technical specification for detecting strength of concrete by ultrasonic-rebound combine method CECS 02:2005 Code for investigation of geotechnical GB50021-2001 Performance High efficiency testing. Lifting speed is more than 60m/s(point distance:20cm) Display the test data graphically. User can watch analyzed result directly Fast and precise automatic judge the sound parameters. Real-time wave display assures test efficiency Humanized software design. Software design applies to user and construction plant. Its help information ensure user handle easily Link the rebound apparatus directly. Detect strength of concrete by ultrasonic-rebound combine method with linking rebound apparatus directly, and get strength of concrete in time. The function has applied for national patent Being sensitive to receive signal. Can receive signal more than 10m in concrete without defects Can supply smooth power to radial energy transducer without external power Standard USB storage with big capacity Interior lithium battery supplies power for apparatus working more than 6 hours Portable, small, light apparatus (1.75kg) Extending function: testing thickness of concrete by impacting echo method. Professional and powerful Windows system analysis software. It can export the data to Excel or Word for advanced analysis Technical data Item Specification Main control unit High-performance embedded computer Input method keyboard Interface USB Receive channel Two Transmission mode Continuous and external Receive sensitivity ≤30uv Amplifier bandwidth 10kHz to 300kHz Sound time accuracy 0.05us Display 640*480 high brightness TFT panel Storage 1G(Interior) 2G(U-Disk) Max sample data length 64k Trigger voltage 65,125,250,500,1000(selectable) Amplifier gain 82dB Sample periods 0.05us to 6.4us,8grade adjustable Amplifier resolution 0.39% Power Interior lithium battery works more than 6hours External lithium battery works more than 6hours (Optional) DC 12V interface AC 100V-240V,50/60HZ Size 260*185*60mm Weight 1.75kg(including the battery Temperature -10℃~ +40℃
Other supplier products
|
|
SK-40/60 Multifunction strength tester |
Executive standard (CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method (JGJ 110-2008) Testing st... |
|
|
SK225-V digital voice test hammer |
Brief introduction: Test hammer SK225-V submitted to GB /T9138-1988, JJG817-93 and JGJ/T23-2001 standards. The instrument is useful for quality In... |
|
|
SK-75 brick test hammer |
Brief introduction: Submit to standard of GB/T50315-2000, the instrument is applied to test light material such as brick, light bone concrete etc.
... |
|
|
SKCL-C型氯离子含量快速测定仪 |
检测方法：ISE法 执行标准 《水运工程混凝土试验规程》JTJ 270-98 《混凝土结构耐久性设计规范》GB/T 50476-2008 《海砂混凝土应用技术规范》JGJ206-2010 测试指标：氯离子浓度、质量百分比 产品介绍 氯离子是诱发钢筋锈蚀的重要因素，为了避免钢筋过早锈蚀，混凝土原... |
|
|
SK-4000混凝土电阻率仪 |
检测方法：利用Wenner阵列传感器（50mm的间距）测试混凝土电阻率 测试指标：混凝土电阻率 产品用途 混凝土电阻率测定仪也叫电位检测仪（锈蚀分析仪），混凝土中钢筋的腐蚀是一个电化学过程，它产生电流使金属离解，电阻率越低，腐蚀电流流过混凝土就越容易，腐蚀的可能性就越大，因此测量混凝土的电阻率... |
供应产品
Same products
