Car seat headrest static strength tester
Applicable standards:
GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static strength test method of automobile seat headrest in detail, including test equipment, test conditions, test steps and evaluation of test results. This standard is the main basis of static strength test of car seat headrest in China.
ECE R17andR21and other Economic Commission for Europe （ECE） regulations: These regulations also contain static strength requirements for car seat headrests and apply to automotive products in the European market. While the details may differ fromGB 11550-2009, the overall requirements are similar.
Us Federal Motor Vehicle Safety Regulations （FMVSS） : The US market also has its own static strength requirements for car seat headrests, which are often reflected in the relevant provisions of FMVSS. There may be some differences compared to European and Chinese standards.
Main parameters:
Load capacity: The maximum static load that the tester should be able to withstand. This parameter is usually determined according to the design and requirements of the headrest, and the common load capacity range is500kg or higher.
Load accuracy: The measurement accuracy of the tester when a static load is applied. This parameter is crucial for assessing the static strength of the headrest, with common load accuracy of±1% or higher.
Displacement range: The maximum amount of displacement that the tester can measure during the test. This parameter is usually determined according to the design and requirements of the headrest, and the common displacement range isbetween 300mm and 400mm.
Displacement accuracy: The accuracy of the tester when measuring displacement. This parameter is also important for evaluating the static strength of the headrest, with common displacement accuracy of±1% or higher.
Test speed: Although the static strength test is mainly concerned with the measurement of load and displacement, the tester usually has a certain test speed control function to adapt to different test needs. The test speed can usually be adjusted within a certain range, such as10-30 times/minute.
Control mode: The control mode of the tester may include manual control and automatic control. Modern tester usually adopts computer automatic control mode to improve the accuracy and efficiency of the test.
Test device: The test device shall include a stable support for fixing the car seat and headrest; A loadable static load device for applying a static load; And the necessary sensors and data acquisition systems for real-time monitoring and recording of various parameters during the test.
Safety protection: The tester should have perfect safety protection measures, such as overload protection, emergency stop button, etc., to ensure the safety and reliability of the test process.
在线联系供应商
Other supplier products
 |
Solids Spontaneously Igniting Tester | Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test ... |
 |
Песк - падающая машина для испытания шлемов мотоцикла | Основные целиВ основном используется для проверки абразионно-устойчивости линз очков шлема и оценки их способности сопротивляться повреждениям, выз... |
 |
Surgical Mask Flame Retardant Tester | Flame-retardant tester for surgical mask, In case of the mask is accidentally exposed to flame, its flame-retardant performance is directly related... |
 |
Thermal Insulation Material Smoldering Tester | Product Introduction: Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control sys... |
 |
Durability Tester for Automotive Wire Markings | Test Standard: Complies with the ISO19642 standard. Test Method: For the durability tester of automotive wire markings, fix a wire approximate... |
Same products
 |
Reliable Components for Water and Industrial Systems | 卖方: 866507 | The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem... |
 |
Double Convex Lenses | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga... |
 |
Wedge Prism | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow... |
 |
Ball Lenses | 卖方: Shandong Yanggu Constant Crystal Optics, Inc | Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use... |
 |
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery | 卖方: Xin Tang Shallow Power Supply Co.,LTD | KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems... |
