Car seat headrest static strength tester

• 

Applicable standards:

GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static strength test method of automobile seat headrest in detail, including test equipment, test conditions, test steps and evaluation of test results. This standard is the main basis of static strength test of car seat headrest in China.

ECE R17andR21and other Economic Commission for Europe （ECE） regulations: These regulations also contain static strength requirements for car seat headrests and apply to automotive products in the European market. While the details may differ fromGB 11550-2009, the overall requirements are similar.

Us Federal Motor Vehicle Safety Regulations （FMVSS） : The US market also has its own static strength requirements for car seat headrests, which are often reflected in the relevant provisions of FMVSS. There may be some differences compared to European and Chinese standards.

Main parameters:

Load capacity: The maximum static load that the tester should be able to withstand. This parameter is usually determined according to the design and requirements of the headrest, and the common load capacity range is500kg or higher.

Load accuracy: The measurement accuracy of the tester when a static load is applied. This parameter is crucial for assessing the static strength of the headrest, with common load accuracy of±1% or higher.

Displacement range: The maximum amount of displacement that the tester can measure during the test. This parameter is usually determined according to the design and requirements of the headrest, and the common displacement range isbetween 300mm and 400mm.

Displacement accuracy: The accuracy of the tester when measuring displacement. This parameter is also important for evaluating the static strength of the headrest, with common displacement accuracy of±1% or higher.

Test speed: Although the static strength test is mainly concerned with the measurement of load and displacement, the tester usually has a certain test speed control function to adapt to different test needs. The test speed can usually be adjusted within a certain range, such as10-30 times/minute.

Control mode: The control mode of the tester may include manual control and automatic control. Modern tester usually adopts computer automatic control mode to improve the accuracy and efficiency of the test.

Test device: The test device shall include a stable support for fixing the car seat and headrest; A loadable static load device for applying a static load; And the necessary sensors and data acquisition systems for real-time monitoring and recording of various parameters during the test.

Safety protection: The tester should have perfect safety protection measures, such as overload protection, emergency stop button, etc., to ensure the safety and reliability of the test process.

Другие товары поставщика

	Micro Rapid Closed Cup Flash Point Tester	Reference Standards： SN/T 3077.1、SN/T 3077.2. SH/T 0768. DL/T 1354. ASTM D93、ASTM D6450、ASTM D3828、ASTM D7094、ASTM D7236、ASTM D56、ASTM D56、ASTM...
	Adiabatic Self - Accelerating Decomposition Temperature Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H...
	Sole heat resistance testing machine	Main uses: The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high...
	Water Leak Detector	Product Description GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emitting Flammable Gases in Contact with Water, GB 19521.4-2...
	Car seat fatigue tester	Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym...

Похожие товары

	PHS‑25C Benchtop Digital pH Meter	Продавец: Келийлонг Электронные Акционерные Компании	Product Description: Equipped with BNC‑composite electrodes and power supplies adapt...
	PHS‑3C Automatic Calibration pH/Thermometer	Продавец: Келийлонг Электронные Акционерные Компании	Product Description: Equipped with BNC‑compatible combination electrodes and power s...
	KL‑016 Benchtop Digital pH Meter (Backlit Display)	Продавец: Келийлонг Электронные Акционерные Компании	Product Description: This instrument features a large‑screen digital display, extern...
	KL‑98 Professional Laboratory pH/ORP/Temperature Meter	Продавец: Келийлонг Электронные Акционерные Компании	Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp...
	KL‑03(I) Pen‑type High‑precision pH Meter	Продавец: Келийлонг Электронные Акционерные Компании	Product Description: This instrument is available in a variety of colors. Calibratio...