Leather Low Temperature Bending Strength Tester G6078-B
Product Introduction
This instrument is primarily used to test the cold and folding resistance of shoes and shoe materials to determine how well the materials or finished products can adapt to low-temperature climates or cold regions. Various folding devices can be installed within the instrument.
Complied Standard
GB/T20991-2007. BS 3144. JIS-K6545. SATRA TM55. GB/T 3903.41-2019. ISO 32100. ISO 5402-1 and other standards.
Main Functions
Tests the folding resistance of leather and similar materials in low-temperature environments.
Features
Surface Treatment: Surface treatment using DuPont powder, electrostatic spray painting, and high-temperature curing at 200°C to ensure long-lasting colorfastness.
Inner chamber is made of high-quality stainless steel, with semi-circular corners for easy cleaning.
A rational air duct and circulation system ensures excellent temperature uniformity within the working chamber.
High-performance motor and fan blades, with a convection breeze mechanism, allow for internal air recirculation.
Nanomaterial door seals and insulation enhance overall performance.
Casing constructed of cold-rolled steel with electrostatically sprayed plastic.
Case Insulation: 100mm high-temperature-resistant rigid polyurethane foam.
Fin-type heat sink with tubular stainless steel heater.
Heat and cold exchange device utilizes ultra-high-efficiency SWEP Refrigerant heat exchange design.
Controller: Taiwan Weilun TH7010 touch-sensitive intelligent programmable temperature controller.
Technical Parameters
1. System: Balanced thermostat with humidity control system
2. Temperature range: -20°C to +150°C
3. Temperature fluctuation: ≤±0.5°C
4. Temperature uniformity: ≤2°C
5. Temperature accuracy: ±0.2°C
6. Heating time: +25°C to +85°C, room temperature to 85°C: approximately 30 minutes, no load
7. Cooling time: +25°C to -40°C, room temperature to -40°C: approximately 50 minutes, no load
8. Standard test chamber configuration:
Window: 320x420x40mm 3-layer vacuum tempered glass
Test piece size: 70 × 45 mm
Bending angle: 22.5°
Number of test pieces: 8
Bending speed: 0-100 ± 3 cpm, adjustable
Flat recessed handle
Door hinge: Imported SUS #304 hinge
Internal energy-saving light: LED
Wire lead hole: φ50 mm (with one rubber plug)
Heating rate: 3-5°C/min (average)
Cooling rate: 0.7-1°C/min (average)
Inner box dimensions: 500 × 600 × 500 mm
Outer box volume: 1000 × 1050 × 1520 mm
Packaging dimensions: 1150 × 1150 × 160 mm
Power supply: AC220V
Machine Weight: 310kg
Product Configuration
1. Machine (1)
2. Die Cutter(1)
3. Instruction Manual (1)
4. Delivery Note (1)
5. Packing List (1)
在线联系供应商
Other supplier products
 |
Gas engine filter tester ISO 4548 | Product Introduction: The gas engine filter is an efficient filtration equipment used to filter and exclude impurities in the medium in the pipeli... |
 |
Geotextile equivalent aperture tester (wet sieve method)丨Geotextile Test Machine | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by wet screen method. The geotextile samp... |
 |
Leather edge oil fatigue testing machine - Textile Testing Equipment | Product Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colore... |
 |
Sample machine / Sample Testing Machine | Purpose: The products are suitable for all kinds of textiles, leather, nonwovens and other products in the inspection of samples. Wide application... |
 |
Fabric Drying Tester | Product Introduction: This device is developed for the automatic test of "dryness" method A and method B specified in JIS L 1096 (Fabric test meth... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
