.

Qinsun UV-master

In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accelerate testing. Textiles may undergo yellowing, decline, and structural changes under the stimulation of outdoor ultraviolet radiation.

UV testing is conducted by exposing materials to high temperature control conditions and alternating cycles of ultraviolet light exposure and humidity UV uses fluorescent ultraviolet lamps to simulate sunlight, and simulates dew and rainwater through condensation or water spraying. The aging types of textiles include discoloration, loss of luster, powdering, cracking, foaming, brittleness,decline, oxidation, etc

Standards:

ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154

Technical parameters:

1. Blackboard temperature setting range:BPT 40-110 ℃; BST 40-120 ℃, but the actual temperature limit of the temperature protection device inside the machine is93 ℃± 10%.

Blackboard temperature control accuracy:± 2 ℃.Blackboard temperature sensors are consumables that require frequent wiping. The surface paint may peel off after a certain period of time, affecting the control accuracy. Therefore, if there is a significant change in color, it needs to be replaced. The specific time depends on the usage situation, usually around two years.

2. Sample size: 48 standard samples of75 * 150mmcan be placed;

3. Sample thickness: The sample thickness shall not exceed 10mm

4. UV wavelength:UVA-340

5. Simulated condensation: The condensation system time can be adjusted

6. Test time: adjustable from0 to 9999

7. Irradiance: adjustable from0 to 1.6w/m2

8. Test time: It can continuously accumulate test time without resetting due to power outages or other factors

9. Irradiance calibration: The irradiance can be calibrated at any point within the set range without changing the program being executed

10. Calibration process: The calibration process achieves automatic input correction to avoid errors caused by manual input

11. UV state, no water, operable

12. Sample space: Large sample space, can be equipped with 3D sample racks

13. Experimental status data can be transmitted through Ethernet cables

14. Lamp lifespan: UV lamp lifespan can reach over 5000 hours

15. Compliant with standards:ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154

Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.


在线联系供应商

至: Standard Group (Hong Kong) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

ISO 12103-2 M2 Test Dust
ISO 12103-2 M2 Test Dust Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the r...
Electric Rubbing Colour Fastness Tester-QINSUN G238CC
Electric Rubbing Colour Fastness Tester-QINSUN G238CC Introduction G238CC Electronic rubbing colour fastness tester is used for testing the color fastness of fabric and leather by dry/wet rubbing. The...
Temperature and Humidity Test Chamber / Temperature & Humidity Tester
Temperature and Humidity Test Chamber / Temperature & Humidity Tester Features and Benefits 1.Wide Temperature Range:Selectable from -20°C, -40°C, -60°C, or -70°C up to +150°C, with a high-efficie...
European standard shrinkage testing machine | European Standard Washer
European standard shrinkage testing machine | European Standard Washer Product Overview TheEuropean Standard Washer(EN 14399-compliant) is a high-performance fastening component designed for industrial and automotive ...
Hot Tack Tester / Heat Seal Tester
Hot Tack Tester / Heat Seal Tester Standards GB/T 34445 - 2017 ASTM F2029 Main Uses The hot - tack tensile tester is an instrument specifically designed to test the hot - tacking ...
供应产品

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android 卖方: China PHONEFIX Technology Co., Ltd WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路,支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏,支持Type-C充电,即插...
HCV1500高精度电压传感器
HCV1500高精度电压传感器 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域,以及对灵敏度、稳定性、可靠性要...
Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...