Upper Leather Flexing Tester ISO 4643
Meet the standard
GB/T20991-2007. EN ISO. SATRA TM25. ISO 4643 and other standards.
Main uses
VAMP VAMP leather extension testing machine with a certain frequency of zigzag test, observe the change of the surface of the test piece, whether the surface of the wrinkle and crack and its severity to evaluate the zigzag resistance of the test material.
Product Advantages
Measures Key Durability: Evaluates the flexing endurance and resistance to cracking of shoe upper materials, a crucial factor for footwear lifespan and appearance.
Standard Compliant: Designed to meet relevant national and international standards (SATRA TM25. ISO 4643. GB/T 20991. EN ISO 20344 sections on upper flexing) for testing upper material flexing resistance.
Simulates Wear on Upper Materials: Replicates the bending and stretching stresses experienced by the shoe vamp during walking.
Evaluates Resistance to Wrinkles/Cracks: Provides a method to assess the material's propensity to develop surface damage from flexing.
Provides Objective Visual Assessment Criteria: Evaluation is based on observing and assessing the severity of wrinkles and cracks according to standard criteria after testing.
Multiple Testing Stations: Available with options for testing multiple samples simultaneously (4 or 12), increasing testing throughput.
Controllable Test Parameters: Allows for precise control of flexing speed, stroke, and clamping angle.
Quantitative Result: Results are based on the number of flexing cycles performed until a specified damage level or after a fixed number of cycles.
Technical specifications
1. Expansion speed: (300±30)r/min
2. Expansion stroke: (19±1.5)mm
3. Sample size: (64±1)mm*(64±1)mm
4. Number of test pieces: 4. 12 samples
5. Clamping Angle: (40±1)°
6. Volume: 70cm*36cm*37cm
7. Power source: AC220V,10A
在线联系供应商
Other supplier products
 |
Geotextile Dynamic Puncture Tester ISO 13433 | Scope of application: It is used to test the penetration ability of various geomaterials to resist steel cones falling from a fixed height, so as ... |
 |
Geosynthetics Horizontal Penetration Tester丨Geotextile Test Machine | Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ... |
 |
Snap Button Tester | Button Snap Pull Tester | Standard ASTM D7142-2/F963: Standard Consumer Safety Specification for Toy Safety CFR 1500: Consumer Product Safety Commission (CPSC) Hazardous S... |
 |
Shoe bending Angle tester | Sole Bending Tester | Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clampe... |
 |
High Temperature Half Thermal Manikin | Product Introduction: This head and torso is designed for testing clothing and headgear in high temperature environments. The head and torso are ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
