Falling ball rebound instrument / Ball Rebound Tester
Product Introduction:
The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008 or ISO8307 or ASMD3574. It is suitable for determining the falling ball rebound property of soft polyurethane foam. The instrument calculates the maximum rebound height of the steel ball and the percentage of the falling height of the steel ball by the steel ball with a given diameter and quality falling freely on the foam sample at a specified height, and the rebound rate represents the resilience of the foam.
Performance parameters:
- Drop ball rebound accuracy: relative accuracy is less than 1.5%
- Steel ball falling height (mm) : 460±0.5%(GB/T6670-97)
-500 ±0.5%(ASTMD3574 and ISO8307)
- Plastic pipe diameter: 40±4mm
- Ball diameter: Φ=16±0.5
- Steel ball mass: 16.7±1.5g
- Measuring range: 10%——100%
- Reading mode: color crystal display
- Sample size: 100×100×50mm
在线联系供应商
Other supplier products
 |
Geomembrane thickness tester丨Geomembrane thickness machine | Scope of Application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ... |
 |
Footwear Cold Insulation Tester EN ISO 20344 / DIN 53351 | Product Introduction Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test... |
 |
High and low temperature memory impact testing machine | Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,... |
 |
Environmental Stress Cracking Resistance Tester / ESCR Tester | Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on polyethylene and other thermoplastics. ISO 22088-3: Configu... |
 |
Carbon Black Content Tester / Carbon Black Content Apparatus | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
