Electro-hydraulic servo dynamic fatigue testing machine
Product Introduction:
Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly used for metal materials and non-metal materials, components, structural parts, standard parts, especially new materials such as ultra-strength steel, titanium alloy and reinforced synthetic fiber and other materials tensile, compression, fatigue, low cycle fatigue, crack growth, fracture mechanics test. The fatigue performance parameters, fatigue life, cyclic elastic modulus and fatigue crack growth rate were measured by symmetric cyclic and asymmetric fluctuating and alternating load cycle fatigue tests.
Standards：
GB / T2611-2007 Tester General technical requirements
GB / T16826-2008 Hydraulic servo universal testing machine
GB 3075 Axial fatigue testing metal
JB /9379-2002 Tension and compression fatigue test machine technical conditions
GB /T228-2010 Metallic materials at room temperature tensile test method
HB5287 Axial Loading Fatigue Test Method for Metal Materials
EN10002 Tensile Test of Metallic Materials
JG 556-2011 Axial Force Fatigue Testing Machine
HG/T 2067- 1991 Technical specifications for rubber fatigue testing machine
ASTM E399-09 Metallic materials Kic standard test for linear elastic plane strain fracture toughness ASTM E1820 2001 JIC test standard for measuring fracture toughness
Performance parameters:
1. Test force:
Maximum static test force (kN) : ±20
Effective measuring range (%FS) : 0.4——100
Indicating accuracy (%) : ±0.5
Maximum dynamic test force (kN) : ±20
Effective measurement range (%FS) : 4——100
Indicating accuracy (%) : ±0.5
Force value resolution: 1/120000
Load sensing element: load measuring force sensor for high stiffness fatigue machine
2. Actuator stroke (mm) : 100
3. Maximum working pressure (MPa) : 21
4. Displacement:
Maximum displacement (mm) : 100
Indicating accuracy (%) : ±0.05
Resolution: 1/120.000
Sensing element: Conventional type: differential transformer type
5. Amplitude (mm) : ±10(frequency 16H)
6. Generator frequency: Hz0.001——100
7. Frequency response range: Hz0.01——60
8. Maximum working frequency for long hours: 6
9. Test waveform: sine, rectangle, oblique wave, triangle, random
10. Counter: 999.999.999 preset |
11. Control mode: test force, displacement, can be smoothly converted
12. Test space:
Net width (mm) : 600
Net height (mm) : 800
Special type: Changes according to user requirements
在线联系供应商
Other supplier products
 |
Multi-Functional Scratch Tester | Introduction Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, ... |
 |
High and low temperature universal creep testing machine | Product Introduction: High and low temperature universal creep testing machine is mainly used for non-metallic materials creep, stress relaxation,... |
 |
Yellowing resistance test chamber | Durable & Reliable | Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro... |
 |
Rapid Crack Propagation Tester / RCP Tester | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid c... |
 |
Leather softness tester | Textile Testing Products | Product Introduction: Measure the softness of leather and hide to know whether the softness of the same batch of leather is uniform, or the softne... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
