Geosynthetics thickness tester丨Thickness Gauge
Scope of application:
Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on the reference plate, and after a specified pressure is applied to the sample with a circular presser foot parallel to the reference plate for a certain period of time, the vertical distance between the two plates is measured, and the thickness of the sample is expressed as the average value of the test results.
Meet the standard:
GB/T13761.1-2009.S0 .ASTM D5199-2001.JTG E50T1112-2006.SL/T 235-5-2012. etc.
Instrument features:
Design and manufacture according to the standard, in line with the standard specifications;
Shell with special surface treatment, corrosion resistance;
Exquisite mechanical pressure system, simple operation can apply 2KPa, 20KPa, 200KPa precise pressure on the sample;
The adjustable level makes the specimen stressed evenly:
The instrument is easy to install and operate;
Using dial gauge measurement, high precision;
The measurement value is displayed digitally for easy reading.
Technical parameters:
Pressure mode mechanical
Measuring range 0.001——12mm
Minimum division value 0.001mm
Presser foot size 2500mm2
Working pressure 2+0.01kPa,20+0.1kPa,200+1kPa
Overall dimensions 600x300x400mm
Weight 40kg
Standard configuration:
1. One host
2. 1 dial table
3. Use 3 weights
4. 1 pan
5. One battery
6. Four screws for the foot
7. Product packing list 1 copy
8. 1 copy of product manual
9. One copy of product certificate
在线联系供应商
Other supplier products
 |
Catheter Power Injection Flow and Pressure Tester YY 0285.1 | Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f... |
 |
Guidewire Pushing Force Tester ASTM F | Standards YYT0807 - 2010 YY/T0663.2 - 2016 ASTMF2394 - 2007 Main Uses The guidewire pushing force tester is a precision testing tool in the med... |
 |
Plastic Smoke Density Tester ISO 5659 | Standards: GB/T8323.2-2008: Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test ISO 5659-1: Plastics -... |
 |
Safety Helmet Anti-static Tester / Testing Equipment | Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB... |
 |
Water bath indentation hardness tester / Indentation Resistance Tester | Product Introduction: Water bath indentation hardness tester is used to determine the indentation hardness of extruded polyethylene anticorrosive ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
