Fiber Blend Ratio Tester
Product Introduction:
It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the specific resistance value of the fiber according to the filling degree of the fiber
Applicable standards:
GB/T 14342-1993 "Synthetic short fiber specific resistance test method"
Technical parameters:
1. fiber specific resistance measurement range :10^6Q——10^13Q
2. test sample weight :15g
3. the measurement voltage is 50V, 100V, the deviation is less than 5%
4. working environment temperature :20℃ —— 2℃， humidity :65% —— 10%RH
5. the instrument in a stable operating voltage and no signal input between 1- 8 hours of zero drift less than 4% soil
6. the basic error of the instrument to the standard resistance measurement :≤ soil 20%
7. Power supply :AC220V
8. overall size :450x265x133mm(LxWXH)
Product Advantages:
Standard Compliance: Adheres to the latest national standard GB/T 14342-2015 for specific resistance testing of man-made staple fibers.
Wide Measurement Range: Capable of measuring fiber specific resistance from 106Ω to 1013Ω.
Accurate Voltage Application: Provides precise 50V and 100V measurement voltages with less than 5% deviation.
Stable Operation: Designed for stability in specified working environment conditions (temperature and humidity), ensuring consistent results.
Low Zero Drift: Exhibits low zero drift (less than 4% over 1-8 hours) when operating voltage is stable and no signal is input.
High Basic Accuracy: Features a basic error of ≤±20% against standard resistance measurements.
Compact Design: With its overall dimensions, it is suitable for laboratory benchtop use.
Indirect Measurement: Ingeniously converts the measured resistance of a compacted fiber sample to the specific resistance of the fiber.
Product Features:
Resistance Measurement System: Core component for accurately measuring the resistance of the fiber sample.
Fiber Compaction Chamber: A mechanism to pack the test sample (15g) to a specific density and geometry, crucial for converting bulk resistance to specific resistance.
Voltage Application: Applies stable test voltages of 50V and 100V.
Digital Display (Implied): For presenting the measured resistance values and calculated specific resistance.
Environmental Condition Requirements: Designed to operate accurately within a specified temperature range (20∘C±2∘C) and humidity range (65%±10%RH).
Stable Design: Components and circuitry engineered for minimal zero drift over prolonged periods.
User Interface: (Implied) for setting parameters and initiating tests.
在线联系供应商
Other supplier products
 |
Geomembrane tear strength tester | Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes to Slow Steady-State Strain) ISO 17548(Geosynthetics - ... |
 |
Friction and wear testing machine | Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T 1865-2009 Application field Petrochemical: Used to assess the ... |
 |
Conveyor Belt Drum Friction meter | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction testing machine has extensive application value in mu... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Collection of needle rubber sleeve resilience tester | Product introduction The collection needle rubber sleeve resilience tester evaluates the force measured by the collection tube when it passes... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
