Fiber Blend Ratio Tester

• 

Product Introduction:

It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the specific resistance value of the fiber according to the filling degree of the fiber

Applicable standards:

GB/T 14342-1993 "Synthetic short fiber specific resistance test method"

Technical parameters:

1. fiber specific resistance measurement range :10^6Q——10^13Q

2. test sample weight :15g

3. the measurement voltage is 50V, 100V, the deviation is less than 5%

4. working environment temperature :20℃ —— 2℃， humidity :65% —— 10%RH

5. the instrument in a stable operating voltage and no signal input between 1- 8 hours of zero drift less than 4% soil

6. the basic error of the instrument to the standard resistance measurement :≤ soil 20%

7. Power supply :AC220V

8. overall size :450x265x133mm(LxWXH)

Product Advantages:

Standard Compliance: Adheres to the latest national standard GB/T 14342-2015 for specific resistance testing of man-made staple fibers.

Wide Measurement Range: Capable of measuring fiber specific resistance from 106Ω to 1013Ω.

Accurate Voltage Application: Provides precise 50V and 100V measurement voltages with less than 5% deviation.

Stable Operation: Designed for stability in specified working environment conditions (temperature and humidity), ensuring consistent results.

Low Zero Drift: Exhibits low zero drift (less than 4% over 1-8 hours) when operating voltage is stable and no signal is input.

High Basic Accuracy: Features a basic error of ≤±20% against standard resistance measurements.

Compact Design: With its overall dimensions, it is suitable for laboratory benchtop use.

Indirect Measurement: Ingeniously converts the measured resistance of a compacted fiber sample to the specific resistance of the fiber.

Product Features:

Resistance Measurement System: Core component for accurately measuring the resistance of the fiber sample.

Fiber Compaction Chamber: A mechanism to pack the test sample (15g) to a specific density and geometry, crucial for converting bulk resistance to specific resistance.

Voltage Application: Applies stable test voltages of 50V and 100V.

Digital Display (Implied): For presenting the measured resistance values and calculated specific resistance.

Environmental Condition Requirements: Designed to operate accurately within a specified temperature range (20∘C±2∘C) and humidity range (65%±10%RH).

Stable Design: Components and circuitry engineered for minimal zero drift over prolonged periods.

User Interface: (Implied) for setting parameters and initiating tests.

Другие товары поставщика

	Computer-controlled Helmet Impact meter	Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ...
	Geosynthetics Horizontal Penetration Tester	Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ...
	Wet leakage current test system of photovoltaic device	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta...
	Building Material Smoke Density Testing machine	Product details In the event of fire, people are choked by smoke or can not escape because they can not see the road. Therefore, in the prevention...
	Cantilever Fabric Stiffness Tester	Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, flexural rigidity and bending modulus of fabrics. ...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...