Catheter Vacuum Leak Tester
Standards
GB 15812.1 - 2005 *Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods* GB 8368 *Disposable Infusion Sets* YY 0489 - 2004. etc.
Main Uses
The catheter vacuum leak tester is a professional device used to detect leaks in medical catheter systems under vacuum conditions. It is mainly used to ensure the sealing and safety of catheters during use and prevent medical accidents caused by leaks. This tester can be widely applied to the leak detection of various medical catheters, such as suction catheters, drainage catheters, anesthesia catheters, endotracheal tubes, etc.
Technical Parameters
Measuring Range: Usually 0 to - 90kPa, which can meet the negative - pressure testing requirements of various catheters. Accuracy: Generally reaching level 0.1 to ensure the accuracy of test results. Vacuum Maintenance Performance: Equipped with an automatic pressure - holding function to ensure the stability of the vacuum during the test. Test Time: The setting range can be from 1 to 99999 seconds, with an error not exceeding ±1 second. Power Supply: Usually 220VAC 50Hz or 120VAC 60Hz to adapt to the voltagerequirements of different regions. Net Weight: Depending on the model, the net weight is approximately 20kg.
在线联系供应商
Other supplier products
 |
Textile water evaporation rate tester | Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana... |
 |
Laminoplasty Plate System Fatigue Tester | Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ... |
 |
Vacuum Environment Ball-on-Disk Tribometer | Standards ASTMD4172-94 ASTMD2266-91 SH/T0189-92 Main Purposes The vacuum ball - disk friction tester is a device specifically used for evaluat... |
 |
Micro Controll Four-ball Friction Tester | Applicable Standards： When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the followin... |
 |
Particle Abrasion Tester | The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
