Catheter Vacuum Leak Tester
Standards
GB 15812.1 - 2005 *Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods* GB 8368 *Disposable Infusion Sets* YY 0489 - 2004. etc.
Main Uses
The catheter vacuum leak tester is a professional device used to detect leaks in medical catheter systems under vacuum conditions. It is mainly used to ensure the sealing and safety of catheters during use and prevent medical accidents caused by leaks. This tester can be widely applied to the leak detection of various medical catheters, such as suction catheters, drainage catheters, anesthesia catheters, endotracheal tubes, etc.
Technical Parameters
Measuring Range: Usually 0 to - 90kPa, which can meet the negative - pressure testing requirements of various catheters. Accuracy: Generally reaching level 0.1 to ensure the accuracy of test results. Vacuum Maintenance Performance: Equipped with an automatic pressure - holding function to ensure the stability of the vacuum during the test. Test Time: The setting range can be from 1 to 99999 seconds, with an error not exceeding ±1 second. Power Supply: Usually 220VAC 50Hz or 120VAC 60Hz to adapt to the voltagerequirements of different regions. Net Weight: Depending on the model, the net weight is approximately 20kg.
Send product request
Other supplier products
 |
Solid Combustion Rate Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test... |
 |
Big Combustion Chamber | Products With the rapid development of high-speed rail, rail rolling stock materials and components used in combustion performance testing require... |
 |
Timken Test Machine | Testing Standards ASTM D 2509 ASTM D 2782 GB/T3142 SH/T0204 Applicable standards Timken extreme pressure friction testing machines are usuall... |
 |
Aerosol Foams Flammability Test device | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi... |
 |
Dry and wet state reverse reflection coefficient tester | Product Introduction: Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
