.

Appliance Stability meter

Product Introduction

The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1 and other standards. The device is composed of a workbench and an Angle adjustment device, which is suitable for stability test of appliances such as home appliances that need to work on a surface. Such as refrigerators, washing machines, air conditioners and other appliances and similar electrical appliances or other products, the test sample is placed on the table through different angles tilt to assess its mechanical stability.

Standards

GB4706.1.GB/T 21547-2008.EN 60335

Product Advantages

Fully conforms to critical international and national safety standards (GB 4706.1 and IEC 60335-1. Article 20.1).

Specifically designed for assessing the mechanical stability of a wide range of home appliances.

Features an adjustable angle device to simulate various tilt conditions as required by standards (typically 10° or 15°, and up to 30° or more for some models).

Provides a stable workbench for safely positioning test samples during testing.

Suitable for both large and small appliances that operate on a flat surface.

Enables objective evaluation of appliance safety and structural integrity.

Product Features

Workbench: A flat surface where the home appliance under test is placed.

Angle Adjustment Device: A mechanism that allows the workbench to be tilted to precise angles relative to the horizontal plane. This is typically adjustable to common test angles like 10° or 15°, as well as potentially higher angles up to 30° or 45°.

Rotary Base/Table: (Implied by "Rotary diameter") Allows for positioning the appliance in the most unfavorable orientation on the inclined plane.

Robust Construction: Designed to safely support the weight of various home appliances during testing.

Technical parameters

Work Surface: Consists of a work surface and angle adjustment mechanism, suitable for stability testing of appliances and other equipment that require a surface for operation.

Load Capacity: Typically ≤100 kg, suitable for large appliances.

Rotation: Rotatable, with adjustable speed.

Angle Range: Typically adjustable from 0° to 15°, with an accuracy of ±0.5°.

Vibration Simulation System: With a frequency range of 5 to 200 Hz, it can simulate vibrations during transportation or use.

Force Sensor and Displacement Measurement: Detects critical tipping angles or displacements, and records data in real time.

Safety Guards: Includes an emergency stop button and anti-tipping brackets to protect valuable samples.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Intramedullary Nails Internal-fixation Pull-out Force Tester
Intramedullary Nails Internal-fixation Pull-out Force Tester Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—Pa...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex...
Qinsun UV-master
Qinsun UV-master In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and acceler...
Syringe Seal Integrity Under Negative Pressure Testing Machine
Syringe Seal Integrity Under Negative Pressure Testing Machine Meet the standard YY0053-2008. GB 15810-2019 single-use sterile syringe, ISO7886-1:2017 single-use sterile syringe, ISO7886-1. ISO8537-2016. YY04...
UV Lamp Aging Test Tester
UV Lamp Aging Test Tester Standard JTG E50 T1164: Testing methods for geosynthetics in highway engineering. GB/T 14522-93: Accelerated weathering tests for plastics, coati...
供应产品

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester 卖方: 上海千实精密仪器 Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester 卖方: 上海千实精密仪器 Product details Furniture flammability tester is mainly used to test the combustion performance ...