American European bending test meter
Test Purpose：
To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose choking or injury hazards.
Compliance Standards：
16 CFR CPS USA: Child Product Safety Certification
ASTM F963: Standard Consumer Safety Specification for Toy Products
EN 71: European Toy Safety Directive
Product Advantages:
Ensures Child Safety: Directly tests for potential hazards from metal wires, significantly reducing the risk of cuts, punctures, or ingestion of broken pieces.
Dual Market Compliance: Designed to perform tests required by both US (ASTM, 16 CFR) and European (EN 71) standards, simplifying testing for manufacturers targeting both markets.
Objective and Quantifiable Results: Provides measurable outcomes (deformation percentage, breakage force) and a pass/fail assessment for sharp edges based on standardized methods.
Supports Design and Quality Control: Valuable for validating material choices, evaluating product design, and performing quality checks during manufacturing.
Reduces Risk of Recalls: Helps prevent costly and damaging product recalls by ensuring compliance with safety regulations before products are shipped.
Acceptance Criteria：
No permanent deformation exceeding 15% of original length
No sharp edges exceeding 0.5mm radius
Maximum allowable breakage force ≥ 2N
Parameter：
| Test Parameter | Specification |
|---|---|
| Deformation Test | Apply 3N axial force for 5 minutes |
| Bend Test | Flex the wire at 90° angle with 5mm radius mandrel |
| Edge Evaluation | Check for sharp edges using ISO 4671-1:2017 gauge |
在线联系供应商
Other supplier products
 |
Timken Test Machine | Testing Standards ASTM D 2509 ASTM D 2782 GB/T3142 SH/T0204 Applicable standards Timken extreme pressure friction testing machines are usuall... |
 |
Thermal - Cold Cycle Testing Machine | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification... |
 |
Biodegradable Internal Fixation Device Tester | Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axia... |
 |
Standard light source sample table meter | Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant... |
 |
Electric pencil hardness test device | Product Introduction: This machine is suitable for all kinds of finished product spray hardness test, such as: mobile shell, laptop computer shel... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
