Building Materials Non-combustibility Tester
Product details
Building materials non-combustibility testeris designed to test the combustibility of main components in homogeneous and nonhomogeneous building products under specific conditions. This instrument belongs to the grading testing equipment of building combustion performance. The tester in the furnace temperature (750 + 5 )℃, uses modular temperature controller to measure precise test results, and then decides the grade of the sample according to the grade A (homogeneous materials) specified in “GB/T 8624-2012 Classification of combustion performance of building materials and products”.
Technical Parameters
1. Probe test points: test chamber, test center, specimen surface, furnace wall
2. Heating power: 1200W
3. Temperature range: (- 200 ~ 1300) ℃
4. Temperature control range: (300 ~ 750) ℃
5. Temperature measurement accuracy: ± 1 ℃
6. Temperature control accuracy: ± 3 ℃
7. The initial furnace equilibrium temperature: (750 ± 5) ℃, temperature drift in 10 minutes ≤ 2 ℃. The relative average temperature in the maximum deviation of 10min can not exceed 10 ℃.
8. Furnace temperature stabilizing time: stabilizing time from room temperature to 750 ℃ ≤1 hour.
9. Heating furnace tube size: diameter (75 ± 1) mm, height (150 ± 1) mm;
10. The sample is cylindrical: diameter 45mm, height (50 ± 3) mm;
11. Temperature probe: diameter 1.5mm, wire diameter 0.3mm, nickel chromium - nickel silicon armored thermocouple;
12. Power adjustment: 0 ~ 1200 W adjustable;
13. Condition adjustment: Before the test, the sample must be adjusted in a ventilated oven at a temperature (60 ± 5 ° C) for (20 to 24) h, and the sample is then allowed to cool down to room temperature in a dry dish. Before the test, the quality of each sample should be weighed , accurate to 0.01g.
14. Power supply voltage: AC220V 50Hz;
Features
1. Heating furnace shell, holder, air hood and test stand are made of stainless steel, beautiful shape, smooth lines, corrosion resistant, anti-aging, durable.
2. Electrical box shell uses spray method, namely the electrostatic powder coating method, making the chamber appearance of excellent quality, strong mechanical strength, anti-corrosion, no rust.
3. Electric spiral lifter. In the process of the test, one operator is enough, greatly saving manpower and time. The integrated design of holder and heating furnace increases the stability of the lift rod. The test piece is put into the furnace with an accurate position.
4. The heating furnace is equipped with refractory tube of electric heating coil, with insulation layer on the outer cover, so that the outer wall will not appear high temperature phenomenon during the test process due to the temperature rise of the furnace, increasing equipment safety performance.
A
6. An observation mirror is set in the front top of the tester, convenient for quick observation of the progress of the sample inside the furnace.
7. There are many kinds of upper machine choices for test equipment. One is the computer control interface, and he other is the man-machine touch screen interface. The user can choose to use as needed.
在线联系供应商
Other supplier products
 |
Spectrophoto meter | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
 |
Cleveland Open Cup Auto Flash Point Analyser | Products: The instrument complies with ISO2592 "petroleum products of flash and fire assay (Cleveland open cup)," the other standard methods, the ... |
 |
Liquid Sliding Penetration Comprehensive Performance Tester | Main uses: The liquid penetration tester is suitable for measuring the penetration performance of diapers, including the amount of slippage, back ... |
 |
Fabric Downproof Tester(Rolling Box) | Fabric anti-drilling velvet testerMainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a vari... |
 |
Flooring Materials Abrasion Resistance Tester | Standard ASTM D3884(Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber or Plastics-Coated Fabrics - Abrasion Resistance) EN 660-2(Abrasio... |
Same products
 |
Custom Stainless Components for OEM Applications | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
