Building Materials Non-combustibility Tester

• 

Product details

Building materials non-combustibility testeris designed to test the combustibility of main components in homogeneous and nonhomogeneous building products under specific conditions. This instrument belongs to the grading testing equipment of building combustion performance. The tester in the furnace temperature (750 + 5 )℃, uses modular temperature controller to measure precise test results, and then decides the grade of the sample according to the grade A (homogeneous materials) specified in “GB/T 8624-2012 Classification of combustion performance of building materials and products”.

Technical Parameters

1. Probe test points: test chamber, test center, specimen surface, furnace wall

2. Heating power: 1200W

3. Temperature range: (- 200 ~ 1300) ℃

4. Temperature control range: (300 ~ 750) ℃

5. Temperature measurement accuracy: ± 1 ℃

6. Temperature control accuracy: ± 3 ℃

7. The initial furnace equilibrium temperature: (750 ± 5) ℃, temperature drift in 10 minutes ≤ 2 ℃. The relative average temperature in the maximum deviation of 10min can not exceed 10 ℃.

8. Furnace temperature stabilizing time: stabilizing time from room temperature to 750 ℃ ≤1 hour.

9. Heating furnace tube size: diameter (75 ± 1) mm, height (150 ± 1) mm;

10. The sample is cylindrical: diameter 45mm, height (50 ± 3) mm;

11. Temperature probe: diameter 1.5mm, wire diameter 0.3mm, nickel chromium - nickel silicon armored thermocouple;

12. Power adjustment: 0 ~ 1200 W adjustable;

13. Condition adjustment: Before the test, the sample must be adjusted in a ventilated oven at a temperature (60 ± 5 ° C) for (20 to 24) h, and the sample is then allowed to cool down to room temperature in a dry dish. Before the test, the quality of each sample should be weighed , accurate to 0.01g.

14. Power supply voltage: AC220V 50Hz;

Features

1. Heating furnace shell, holder, air hood and test stand are made of stainless steel, beautiful shape, smooth lines, corrosion resistant, anti-aging, durable.

2. Electrical box shell uses spray method, namely the electrostatic powder coating method, making the chamber appearance of excellent quality, strong mechanical strength, anti-corrosion, no rust.

3. Electric spiral lifter. In the process of the test, one operator is enough, greatly saving manpower and time. The integrated design of holder and heating furnace increases the stability of the lift rod. The test piece is put into the furnace with an accurate position.

4. The heating furnace is equipped with refractory tube of electric heating coil, with insulation layer on the outer cover, so that the outer wall will not appear high temperature phenomenon during the test process due to the temperature rise of the furnace, increasing equipment safety performance.

A

6. An observation mirror is set in the front top of the tester, convenient for quick observation of the progress of the sample inside the furnace.

7. There are many kinds of upper machine choices for test equipment. One is the computer control interface, and he other is the man-machine touch screen interface. The user can choose to use as needed.

Другие товары поставщика

	Paper folding tester	Test principle The machine uses the motor drive screw to move the fixture. The test fixture is placed between the upper and lower sets, and then p...
	Building Materials Monomer Combustion test Dust Removal Equipment	Product details In a monomer combustion test, the material combustion can produce large amounts of smoke and dust, which pollutes the environment....
	Four-door Two-cap Durable Test Stand	Real door electric glass lifter and manual lift is used to finish the performance and durability test. White car body and real car (passenger car) ...
	Plastic Friction and Wear Test device	Product Description: Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can b...
	UV Lamp Aging Test Tester	This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, streng...

Похожие товары

	Custom Stainless Components for OEM Applications	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...