Slip-on Flange Loose And Elding Flange
Slip-on Flange Compared with common slip-on-welding flange,hubbed slip-on flange has a short neck, which increases the strength and loading capacity of the flange.Therefore,it can be used on pipeline with higher pressure.On the other hand,it is more expensive than regular plate welding flange.With a neck,the flange is easier to bump against each other during transportation. Available Sizes 3/8"~40",DN10~DN1000 Standards GB/T9112-2000,GB/T9113.1-2000,GB/T9113.2-2000,GB/T9113.3-2000,GB/T9113.4-2000,GB/T9124-2000,GB/T13402-1992 HG/T20592-2009,HG/T20614-2009,HG/T20615-2009,HG/T20623-2009,HG/T20635-2009 ASTM B16.5-2009,ASTM B 16.47-2006 API605-1988 MSS SP 44-2006 CSA Z 245.12-05-2005 EN,EN BS1560-3.1-1989,BS4504-3.1-1989 AFNOR NF E ISO AS2129-2000 JIS B2220-2004 Raw Materials Carbon steel:A105 Alloy steel:A182F 1-F 2-F 5-F 9-F 10-F 91-F 92-F 122-F 911-F 11-F 12-F 21-F 22 Stainless steel:A182 304-304H-304L-304N-304LN 316-316H-316L-316LN 321-321H 347-347H Low-temperature steel:A522 A707 Grade L 1-L 2-L 3-L 4-L 5-L 6-L 7-L 8 High-performance steel:A694 F 42-F 46-F 48-F 50-F 52-F 56-F 60-F 65-F 70F Pressure Grade American System:CLASS150,CLASS300,CLASS400,CLASS600,CLASS900,CLASS1500. European System:PN2.5,PN6,PN10,PN16,PN25,PN40,PN63,PN100. Flange Facing Flat face(FF),Raised face(RF),Tongue face(T),Groove face(G),Female face(F),Male face(M),Ring joints face(RJ). Producing Process Cutting of Raw Material-Die Forging-Machining Application The flange is widely used in many areas such as power generation plant, petroleum industry,natural gas system,chemical industry,shipbuilding industry,heating system,paper-making industry,metallurgy industry,etc
Other supplier products
|
|
Threaded Flange Threaded Flange has its inner bore surface designed as tubular thread,which matches with threaded pipe to achieve connection.Theref... |
|
|
Slip-on Flange Compared with common slip-on-welding flange,hubbed slip-on flange has a short neck, which increases the strength and loading capacit... |
|
|
Integral Flange The Integral Flange(IF)is designed for connection of pipes.As one of hubbed welding neck steel pipe flanges,it can be made by carb... |
|
|
PIPE CAP Pipe cap is usually welded onto the end of a pipeline or screwed into the external thread on a pipe end to block up the pipe. Generally, i... |
|
|
Loose Flange,Lap joint flange In terms of connection mode between flange and pipe, flanges falls into five basic categories which are slip-on weldi... |
供应产品
Same products