Cold Rolled And Pickled Titanium Sheet And Curve Screen Plate
Product Description99.95% Pure molybdenum sheets and plate for sapphire furnaceMolybdenum sheets from 0.005 inches to 0.150 inches in thickness is classified as molybdenum refractory sheet. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields.Molybdenum plates from 0.187 inches to 3 inches in thickness is classified as molybdenum refractory plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries.Specification:Purity: >=99.95%Density: 10.2g/cm3Thickness: >=0.1mmWidth: 20-600mmLength: Less than 2000mmStandard: ASTM, GB3876-83Surface: Hot rolls, bright, groundCharacteristics: high melting point(2610C), high strength, high level of thermal conductivity, a low coefficient of thermal expansion, excellent resistance to oxidation at high temperatures, excellent resistance to electrochemical corrosion, The tolerance of Molybdenum sheetsThickness(mm)tolerances(mm)width(mm)tolerances(mm)length(mm)tolerances(mm)flatness(%)0.1mm±0.01600mm±1mm2000mm±5mm< 2%0.2mm±0.02600mm±1mm2000mm±5mm< 2%0.3mm±0.02600mm±1mm2000mm±5mm< 2%0.4mm±0.03600mm±1mm2000mm±5mm< 2%0.5mm±0.03600mm±1mm2000mm±5mm< 2%0.8mm±0.05600mm±1mm2000mm±5mm< 2%1mm±0.06600mm±1mm2000mm±5mm< 2%1.5mm±0.06600mm±1mm2000mm±5mm< 2%2mm±0.06600mm±1mm2000mm±5mm< 2%3mm±0.2500±1mm500±2mm< 2%4mm±0.2500±1mm500±2mm< 2%
Other supplier products
|
|
Product DescriptionProducts IntroductionItem nameGB Titanium Gr5 Tc4 Ti StripStandardASTM B265,ASTM F67,ASTM F136,GB/T3622.MaterialGr5.Specificatio... |
|
|
Product Description99.95% Pure molybdenum sheets and plate for sapphire furnaceMolybdenum sheets from 0.005 inches to 0.150 inches in thickness is ... |
|
|
SpecificationsStandards: a) GB / QB: QCr0.5, QCr0.5Zr0.15, QZr0.2, QZr0.4 b) ASTM / CDA: C18200, C18150, C15000,C18000ASTM/CDADIN/ENGBSizeC18150CuC... |
|
|
Product Description Sample Features:1) Type:Titanium Seamless and Welded Tube 2)Standard: ASTM B338 3) Wall Thickness: 0.15-20mm4) OD: Φ 0.5-Φ 500m... |
|
|
SpecificationUNSW.NrN055002.4375Chemical composition Grade%NiCuAlTiFeMnSCSiK500Min6327.02.300.35 Max33.03.150.852.01.50.010.250.5Mechanical propert... |
供应产品
Same products