Impact-resistant, wear-resistant and high-strength titanium carbide rods
Compared with traditional high-speed steel bars, hard alloy titanium carbide round bars offer a cutting speed that can be increased by three to five times, significantly reducing processing time in mass production. These bars possess a uniform microstructure with grain size controlled below 1 μm, ensuring consistent performance across all sections of the material and preventing tool failure caused by material inhomogeneity. In the mold industry, cold stamping die inserts fabricated from this material exhibit a service life 50 to 100 times longer than that of steel inserts, thereby substantially reducing replacement frequency and overall production costs. Cemented carbide titanium carbide round rods are high-performance materials manufactured through powder metallurgy, with titanium carbide serving as the primary hard phase and cobalt or nickel acting as the binder phase. The hardness of this material exceeds HRC85, and its wear resistance significantly surpasses that of conventional steel. Even in high-temperature environments exceeding 500 °C, it maintains stable mechanical performance. Additionally, this round bar demonstrates exceptional dimensional accuracy, with diameter tolerances controlled within ±0.01 mm and surface roughness as low as Ra 0.02 μm. It is particularly well-suited for the manufacture of precision cutting tools and mold cores. When used to machine difficult-to-cut materials such as stainless steel and titanium alloys, tools made from this material exhibit a tool life 10 to 20 times greater than that of high-speed steel tools, thereby markedly improving production efficiency.
在线联系供应商
Other supplier products
 |
Titanium carbide round rods for metallurgical mold field | Titanium carbide alloy rods are alloy rods with titanium carbide as the main component, combining high hardness, wear-resistant properties, good ... |
 |
Particle size 50-200nm titanium carbide powder | Titanium carbide powder is a kind of gray-black ultra-fine powder, the purity can be up to 99.9% or more, the average particle size between 0.5-5... |
 |
Titanium carbide hard alloy guide wheel - transmission | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium carbide rods - complete specifications in stock | The manufacturing process of this round bar is highly stringent, with rigorous control over the purity of titanium carbide powder (purity ≥99.5%... |
 |
Titanium carbide powder for automated forming | This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/... |
