Titanium carbide powder for automated forming
This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K), and can be used to make conductive ceramics, heating elements, etc. After being compounded with copper powder, the resulting composite material features both high hardness and high electrical conductivity, making it suitable for manufacturing spark electrodes, with the electrode loss rate reduced to below 0.1%. The particle size distribution of the powder is narrow, and the ratio of D50 to D90 is less than 1.5, which can ensure the uniformity of the density of the formed green body and reduce the deformation after sintering. In the field of electronic packaging, it can be used to prepare high thermal conductivity packaging materials to solve the heat dissipation problem of chips. Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components. Coating it on the surface of steam turbine blades can resist the erosion and oxidation of high-temperature gas, thereby extending the service life of the blades. The powder has a high grinding efficiency and can be used to make abrasives. When grinding hard alloys, its efficiency is twice that of alumina abrasives. In the processing of optical glass, the grinding tools made of this powder can ensure the high smoothness of the glass surface.
在线联系供应商
Other supplier products
 |
Titanium carbide hard alloy guide wheel - Customized version | 这种硬质合金碳化钛导轮具有优异的抗热冲击性能。即使温度从室温骤升至300℃，再骤降至室温，也不会发生开裂，因此适用于间歇性生产环境。导轮尺寸范围广，直径从50mm到500mm，宽度从10mm到100mm，可适配不同类型的拉丝或轧制设备。在光纤和光缆生产中，它可以精确引导光纤，使光纤衰减率保持在... |
 |
Chromium carbide powder for strengthening mining machinery parts | This powder has good chemical stability. At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated ni... |
 |
Industrial-specific titanium carbide guide wheels | 该导轮可根据线材或管材的具体尺寸和要求定制V型、U型、半圆形等各种槽型，满足多样化的生产需求。经过精密抛光处理，表面粗糙度可低至Ra 0.01 μm，显著减少摩擦对线材的损伤，使金属线材的抗拉强度提高10%以上。在汽车刹车线制造中，该导轮提供的稳定导向可确保均匀的张力分布，最大限度地降低... |
 |
Control accuracy ±0.002 mm hard alloy guide wheel | Carbide titanium carbide guide wheel has a wide range of working temperature, -100 ℃ to 600 ℃ environment with stable performance, in the low-tem... |
 |
Ultrafine-grained chromium carbide powder | This powder has good chemical stability. At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated ni... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
