High-strength titanium carbide rods - machine tool parts
Titanium carbide round rods of cemented carbide are high-performance rods made by powder metallurgy process, with titanium carbide as the main hard phase and cobalt or nickel as the binder phase. Its hardness is as high as over HRC85, and its wear resistance far exceeds that of ordinary steel. Even in high-temperature environments above 500℃, it can still maintain stable performance. This round bar has extremely high dimensional accuracy, with a diameter tolerance that can be controlled within ±0.01mm and a surface roughness as low as Ra0.02μm. It is highly suitable for manufacturing precision cutting tools, mold cores, etc. When processing difficult-to-cut materials such as stainless steel and titanium alloys, the tool life made of it is 10 to 20 times that of high-speed steel tools, which can significantly improve production efficiency. The oxidation resistance temperature of titanium carbide round rods made of hard alloy can reach up to 800℃. They are less prone to oxidation wear in high-temperature cutting environments and are suitable for processing difficult materials such as high-temperature alloys. After its surface undergoes mirror finish treatment, the coefficient of friction is as low as 0.1, which can reduce the frictional resistance with the workpiece and lower the processing energy consumption. In textile machinery, it is often used to make wear-resistant guide rods to ensure that the yarn is not scratched during high-speed operation and to improve the quality of textiles.
Other supplier products
|
|
Aerospace grade titanium carbide powder |
TiC titanium carbide powder materials are widely used in machining, electronic information, metallurgy and minerals, aerospace and fusion reactor... |
|
|
Wholesale round bars from stock |
Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ... |
|
|
Suitable for chemical equipment manufacturing carbide round bar |
The production process of this round bar is extremely rigorous, from the control of the purity of the titanium carbide powder (purity ≥ 99.5%) t... |
|
|
Carbide guide rollers for wire and cable production |
Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, witho... |
|
|
Titanium carbide rods - suitable for hardware molds |
Compared with traditional high-speed steel, hard alloy titanium carbide round bars enable a 3 to 5 times increase in cutting speed, significantly r... |
供应产品
Same products
