Titanium carbide hard alloy guide wheel - high hardness
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. The dynamic balance accuracy of the guide wheel reaches G0.4 grade. When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface. In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
Other supplier products
|
|
Titanium carbide hard alloy guide wheels for industrial use |
This type of guide wheel can be customized with groove shapes according to the specifications of the wire or pipe, such as V-shaped, U-shaped, semi... |
|
|
Wide-temperature-range titanium carbide guide wheel |
Hard alloy titanium carbide guide wheels exhibit excellent impact resistance. In cases where the wire is suddenly tensioned or broken, these guide ... |
|
|
Titanium carbide powder that meets international standards |
Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I... |
|
|
Titanium Carbide Round Bar with Excellent Wear Resistance |
Titanium carbide alloy rods are alloy rods with titanium carbide as the main component, combining high hardness, wear-resistant properties, good hi... |
|
|
Titanium carbide hard alloy guide wheels - Factory direct supply |
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
供应产品
Same products
