Special for titanium carbide hard guide wheel transmission
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight is 30% lighter than that of steel guide wheels of the same size, which can reduce the load on the drive motor and lower energy consumption by more than 15%. In the production of precision tubes, the groove accuracy of the guide wheel reaches IT3 grade, which can ensure that the outer diameter tolerance of the tube is controlled within ±0.01mm, meeting the high-precision requirements of the medical, aviation and other fields. The dynamic balance accuracy of the guide wheel reaches G0.4 grade. When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface. In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
在线联系供应商
Other supplier products
 |
Ultra-high dimensional accuracy guaranteed titanium carbide round rods | The production process for these round bars is extremely rigorous, from the strict control of titanium carbide powder purity (purity ≥ 99.5%) ... |
 |
Chromium carbide powder for metallurgical wear-resistant parts | This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
 |
Large specific surface area, high activity chromium carbide powder | Chromium carbide powder is a grey-black powder with a melting point of about 1890°C and a Mohs hardness of 8.5. It has excellent wear resistanc... |
 |
Titanium carbide powder for ceramic coating raw materials | Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I... |
 |
Highly reactive titanium carbide powder | Titanium carbide TiC powder are mainly used in the steel-bonded cemented carbide, cermet components, tungsten-cobalt-titanium cemented carbide and ... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
