Durability Tester for Automotive Wire Markings
Test Standard:
Complies with the ISO19642 standard.
Test Method:
For the durability tester of automotive wire markings, fix a wire approximately 300mm long on the machine table with the printed part facing upward. Use a friction hammer equipped with wool felt to rub the printed part with a certain load, speed, and reciprocating stroke, so as to check the fastness of the printed part. It can also be used to test the fastness of the printed characters on the plastic surface.
Main Parameters:
| Parameter | Description |
|---|---|
| Friction speed | 10 - 40 C.P.M (adjustable as needed) |
| Friction distance | 250 mm |
| Load | 10 ± 1 N (per ISO 19642) |
| Wool felt | 50 × 50 × 3 mm (75% wool, 25% fiber) (per ISO 19642) |
| Test groups | 3 groups (simultaneous testing of 3 samples) |
| Spare parts | 15 wool felt pieces (50 × 50 × 3 mm, 75% wool, 25% fiber) |
| Counter | 6-digit (range: 0–999,999) |
| Motor | 40 W |
| Power supply | 220 V, 50 Hz |
在线联系供应商
Other supplier products
 |
Automotive Wires Flammability Tester | Standards FMVSS 302(Federal Motor Vehicle Safety Standard) ISO 6722(Road Vehicle Cable Flammability) UL 94(Tests for Flammability of Plastic Mat... |
 |
Air Permeability Tester-QINSUN | Air Permeability Tester of textile fabrics complies with ASTM D737. ISO 9237/7231. BS 5636. etc. It is used to test the resistance of the flow of a... |
 |
Pipe drop hammer impact testing machine | Product Introduction: 1. Name: drop hammer impact testing machine 2. Model :G-1 3. Product introduction: Automatic series drop hammer impact tes... |
 |
STD SOLARBOX 1500 - 3000 | Introduction Radiant energy in the STD SOLARBOX is provided by a single superior air-cooled Xenon Lamp generating an irradiance level up to two ... |
 |
MARK-II Slip Resistance Tester | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
