Durability Tester for Automotive Wire Markings
Test Standard:
Complies with the ISO19642 standard.
Test Method:
For the durability tester of automotive wire markings, fix a wire approximately 300mm long on the machine table with the printed part facing upward. Use a friction hammer equipped with wool felt to rub the printed part with a certain load, speed, and reciprocating stroke, so as to check the fastness of the printed part. It can also be used to test the fastness of the printed characters on the plastic surface.
Main Parameters:
| Parameter | Description |
|---|---|
| Friction speed | 10 - 40 C.P.M (adjustable as needed) |
| Friction distance | 250 mm |
| Load | 10 ± 1 N (per ISO 19642) |
| Wool felt | 50 × 50 × 3 mm (75% wool, 25% fiber) (per ISO 19642) |
| Test groups | 3 groups (simultaneous testing of 3 samples) |
| Spare parts | 15 wool felt pieces (50 × 50 × 3 mm, 75% wool, 25% fiber) |
| Counter | 6-digit (range: 0–999,999) |
| Motor | 40 W |
| Power supply | 220 V, 50 Hz |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Martindale Abrasion & Pilling Tester-QINSUN | Martindale Abrasion And Pilling Tester Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of t... |
 |
360 rotary tank cleaning equipment, orbital tank washer | High impact 3D rotary tank washer Working Principle: Impeller is driven by cleaning fluid and drives internal reduction mechanism. Gear mechani... |
 |
Thermal Protective Performance Tester (TPP)-QINSUN | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Conical twin screw extrusion platform | Product Introduction: The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the... |
 |
Blackboard Shaker | Product Overview The Blackboard Shaker is a multifunctional kitchen tool designed for seasoning control, featuring a chalkboard surface for labeli... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
