Foams making silicone rubber,Shockproof & Waterproof Silicone Rubber,Softy Silicone Rubber
INTRODUCTION OF SILICONE FOAMS:
Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. Vibrant colors can be achieved by adding color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.
THE USAGE OF SILICONE FOAMS:
Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.
THE CHARACTERISTIC OF SILICONE FOAMS:
1.Mixed Viscocity
2.Very soft
3.Excellent temperature resistence
IMPROVE SURFACE FINISH AND MINIMIZE VOIDS WITH BACK PRESSURE:
Use a board that will completely cover the mold opening. Using a drill bit, drill 3 holes in the board spaced a few inches / cm apart. Make sure that, when the board is placed over the mold opening, the holes are over the mold cavity and rising foam will be able to make it through. Apply Ease Release 200 thoroughly too both sides of the board and into the drilled holes. Mix and pour foam into mold cavity and place board over mold opening. Hold board firmly in place. As foam rises in the mold cavity, some foam will grow out of the drilled holes. After the foam stops growing, you can let go of the board. Do not demold for at least 20 minutes.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Other supplier products
|
|
Addition Silicone Putty for Dental Molds |
INTRODUCTION:It is a hydrophilic addition silicone rubber impression material, it contains two components, Part A is platinum catalyst, and P... |
|
|
Silicone rubber for computer keyboard,Colorful Silicone Rubber,Fast Curing Liquid Silicone Rubber |
PRODUCT DESCRIPTION:This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.KEY FEATUR... |
|
|
Silicone rubber for making logo sheet,Multiple Hardness |
PRODUCTS DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection ... |
|
|
Candles Mold making Silicone Rubber,Low Shrinkage Silicone Rubber,Crafts Mold Making Silicone Rubber |
FEATURES OF CANDLES MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resista... |
|
|
Silicone Rubber for Ceramics mold making, |
FEATURES OF CERAMICS MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resis... |
供应产品
Same products
