Platinum Cure liquid molding Silicone Rubber for rapid Prototyping
Platinum Cure liquid molding Silicone Rubber for rapid Prototyping
Prototyping Silicone
Features
Application:
GC RTV silicone G-8 series are great for prototyping. Rapid prototyping is a method to create a original model or functional parts quickly from your design to an real item. When you draw a CAD and create a new model by stereo lithography or other 3D printing process, it can be duplicated by prototyping silicone to make a mold and cast parts. Now, the prototyping silicone is wildly used for car model, toy model, part model, plane model, molding, etc.
Operation Method:
Both pouring or brushing operation methods for our rapid prototyping molding silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brusing.
Appearance
Part A: a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
Technical Data
Characteristics of the non cured product
Properties |
G-820 |
G-825 |
G-830 |
G-835 |
G-840 |
|||||
A |
B |
A |
B |
A |
B |
A |
B |
A |
B |
|
Appearance |
low viscous liquid |
|||||||||
Colour |
translucent |
|||||||||
Density [g/cm 3 ] at 23 °C, approx |
||||||||||
Viscosity [mPa·s] at 23 °C, approx |
5000±1000 |
6000±1000 |
7000±1000 |
8000±1000 |
9000±1000 |
PolymerisationCuring conditions: 1h at 80 °C
Properties |
G-820 |
G-825 |
G-830 |
G-835 |
G-840 |
Hardness Shore A |
20±2 |
25±2 |
30±2 |
35±2 |
40±2 |
Tensile strength [N/mm 2 ] |
45±10 |
50±10 |
55±10 |
55±10 |
60±10 |
Elongation [%] |
500±50 |
500±50 |
450±50 |
450±50 |
450±50 |
Tear strength [N/mm] |
22±2 |
24±2 |
26±2 |
24±2 |
12±2 |
Notice:
What is the hardness should I choose?
Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design.
Warm Tips:
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; it’s highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
Package
Part A:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Part B:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
在线联系供应商
Other supplier products
High quality rtv Molding Silicone rubber for furniture mold making | High quality rtv Molding Silicone rubber for furniture mold making Furniture Molding Silicone GC RTV silicone C-825 are good for furniture moldin... | |
Platinum Cure rtv2 Silicone Rubber for Jewelry Molding | Platinum Cure rtv2 Silicone Rubber for Jewelry Molding Jewelry Molding Silicone Features: Application: GC silicone G-8 series are great for jew... | |
Supply rtv liquid silicone rubber making molds for art Foundry | Supply rtv liquid silicone rubber making molds for art Foundry Art & Foundry Casting Silicone Rubber Model NO.: C-825 and C-830 Hardness: 25... | |
Where to buy silicone rubber molding material for shoe sole mould | Where to buy silicone rubber molding material for shoe sole mould Shoe Sole molding Silicone GC RTV silicone C-825 are good for shoe sole molding... | |
Platinum Cure liquid molding Silicone Rubber for rapid Prototyping | Platinum Cure liquid molding Silicone Rubber for rapid Prototyping Prototyping Silicone Features Application: GC RTV silicone G-8 series are gr... |
Same products
Embossed Silicone Rubber Wristbands/Bracelets Bulk | 卖方: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... | |
SILICONE BRACELET | 卖方: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... | |
Silicone Square ICE Cube Tray | 卖方: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... | |
Silicone Sports Bottle | 卖方: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... | |
Silicone Sphere Tray | 卖方: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |