Sweating Guarded Hot Plate Tester STD-AG48
Test Principle
Under standard test environment, heat the fixed aluminum or copper plate and keep a fixed temperature, test the heating power, then test the power of the same situation after covering the sample cloth, to get the hermal and evaporative of clothing material.
Feather
With a heat plate fully simulated human skin mechanism, Easy to clean.
Automatic water supply system, can ensure the stability of the water supply and does not leak do not require any adjustment.
Instrument can automatic adjustment of PID control parameters based on sample thickness to achieve the test conditions.
Wind speed continuously adjustable from 0-1.2m/s, to meet variety test standard for thermal resistance, wet resistance and heating performance test.
The width of the thermal protection ring is 127mm to ensure that the heat flow is transmitted only from the test sample
Can connect WIFI with computer.
Standards
GB/T11048. ISO11092. ASTMF1868-09. BS 8515. ASTM D 1518-2014. JIS L1096-2010. ASTM F 1868-02
Key Specification
|
Model |
STD-AG48 Sweating Guarded Hot Plate Tester |
|
Thermal resistance (RCT) range |
0.002~2.0 m2.K/W |
|
Wet resistance (RET) range |
0~1000 m2.Pa/W |
|
Test board temperature range |
30℃~40℃, adjust |
|
Temperatureprecision |
±0.03℃ |
|
Wind speed |
0-1.2m/s, continuous adjustable |
|
Wind speed precision |
±1% |
|
Test sample thickness |
0-50mm |
|
Test plate area |
254mm×254mm |
|
Sample area |
512mm×512mm |
|
Thermal ring width |
127mm |
|
Power supply |
AC220V, 50/60HZ |
|
Dimension |
73×61×35cm |
|
Weight |
60Kg |
在线联系供应商
Other supplier products
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
 |
Textile Fiber Composition Analyzer | Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2... |
 |
Gloves Cut Resistance Testing Machine | Safety Glove Cutting Resistance Test Machine and testerfor testing the upper, protective gloves, leather and other materials, cutting strength, sui... |
 |
Contact Heat Resistance Evaluation Tester | Product Details The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time r... |
 |
Model Coin-cell Swelling System | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
