Universal Abrasion Resistance Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
TheUniversal Abrasion Resistance Testercan be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleeceand other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials. The test sample may be dry or immersed in water, oil, or other liquids.
The instrument is mainly composed of control system and friction system. The sample is installed on the clamp and is tightened. The upper fixture with the sandpaper is going down, adjust the position of the weight so that the sandpaper in contact with sample surface, through the control system set the number of friction times of the sample, and start the instrument. The lower fixture base does front-to-backmotion, so that the sample and sandpaper being rubbed against each other. When the number of times the movements reach the set value, the instrument stops and remove the sample to observe the degree of wear.
Suitable for testing all kinds of fabrics, including wear performance and wear resistance of clothing, shoes and industrial textiles.
Standards
ASTM D3514/D3885/D3886.AATCC 119/120.FTMS 191/5300/5302.FORD EFB 15J2/BN 112-01
Accessories
Frosted accessories
Cloth edge and fold between the friction sample
Elastic friction pad
Abrasive 50 yards / roll
3 rating cards for ASTM D3514
Technical Parameters
The test runs in automatic mode, ensuring both accurate of the test results with repeatability and eliminating the need for the operator to evaluate the test results;
The advanced gripping device ensures constant sample tension;
With a flat-grinding test head (inflatable membrane type of wear test method) and a mill-grinding test head and the required weight and the initial abrasive;
Built-in timer and mechanical cycle counter;
The machine with a reciprocating table, flat grinding / mill grinding test head mounted on top;
Clamping ring inner diameter: 94 mm;
Lock ring height: ≤9.5 mm;
Speed: 120 ± 15/min;
Moving: 25 mm;
Air pressure: 62 kPa (9 psi);
Dimensions: 330 × 500 × 460mm (length × width × height);
Weight: 33kg (72lb);
Power: 120/230 V, 50/60 Hz, 2A / 1A.
在线联系供应商
Other supplier products
 |
Electric bicycle lighting device testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Meet the standard: EN 15194 ISO 4210 UL 2849 ECE R50 StVZO Scope of application: Public... |
 |
Flame retardant paper and board burning tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Technical parameters 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :... |
 |
Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal natural climate and solar and other experimental condit | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Automotive & Coatings: ISO 4892-1/2. ASTM G155/G151. SAE J2527 Medical &... |
 |
Aerosol Sensor Test System，Aerosol and Dust Monitors Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Aerosol Sensor Test System is designed for development, testing, and calibration of act... |
 |
Plastic Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description: Plastic sliding friction wear tester consists of two main parts: the ... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15.... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ... |
