Rubber low temperature brittleness testing machine
Product Introduction:
Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according to GB/T 15256 and GB/T5470 standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.
Technical parameter:
1. temperature control range: -80℃ (room temperature ≤25℃) (there are -60. -70. -80℃ three models for customers to choose)
2. cooling speed:
0 ℃ —— 1.2 ℃ —— 20 ℃ / min
- 20 ℃ —— 1.0 ℃ to 30 ℃ / min
- 30 ℃ —— 0.7 ℃ to 60 ℃ / min
-40℃——-60℃ about 0.7℃/min
-60℃——-80℃ About 0.5℃/min
Note: The use environment is used at room temperature (23-25 ℃)， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.
3. after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃
4. overall size: 900×505×800mm (length × width × height)
5. the overall size of the studio: 220×170×70mm (length × width × height)
6. cooling medium: ethanol or other non-freezing liquid
7. mixing motor: 15W
8. working power supply 220V——240V,50Hz,2kW
在线联系供应商
Other supplier products
 |
Fabric Flame Retardant Tester | The instrument is used to measure the intensity and speed of burning of flammable textiles when ignited. Standards GB/T 14644-2014 Textiles-Burni... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti... |
 |
Helmets Designated Protection Areas Tester | The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all... |
 |
fingertip hand abrasion tester | Functionality of a product is considered as a matter of course, so the perception of quality is determined primarily by the visual appearance. Dam... |
 |
Multi-Finger Scratch/Mar Tester | Standards Chrysler LP-463DD-18-01 Scratch and Mar Resistance of Automotive Plastics Chrysler PF-10938 Scratch and Mar - Resistance of Molded-In-C... |
Same products
 |
G631A electric shoe stripping testing machine | 卖方: Standard International Group (HK) Limited | Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength... |
 |
G645 leather shoe hook stiffness testing machine | 卖方: Standard International Group (HK) Limited | Product Introduction: Leather shoe hook stiffness tester is suitable for measuring the longitudi... |
 |
G651 national standard shoe bending tester | 卖方: Standard International Group (HK) Limited | Product Introduction: National standard shoe bending testing machine is specialized in testing f... |
 |
G664 fibreboard bending testing machine | 卖方: Standard International Group (HK) Limited | Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and c... |
 |
G678W-L cold resistance testing machine for shoes | 卖方: Standard International Group (HK) Limited | Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubb... |
