Double End Studs
China double stud boltrefer to a cylindrical fastener with threads at both ends. Both ends of the thread need to be matched with nuts and washers. It is used for two connected parts with through holes and is used for the fixed link function of connecting machinery.Studs are widely used in electric power, the chemical industry, oil refining, valves, railways, bridges, automobile and motorcycle parts, machinery, steel structures, hanging towers, large buildings, etc.All items are produced in strict accordance with industry standards or client-specific requirements.
Specification of double sided threaded stud
|
Thread Specification Range (mm) |
M12-M300 |
|
Maximum Processing Length (m) |
≤10m |
|
Strength Range |
≤1450MPa |
|
Linear tolerance control accuracy |
|
|
Surface roughness |
|
|
Geometric Tolerance |
thread coaxially at both ends ≤0.02mm |
|
Friction Coefficient |
μtot, μb, μth |
|
Surface Treatment |
Black oxide, Phosphating, Flake zinc-aluminum coating (Dacromet, Geomet), HDG (Hot dip galvanizing), Electro galvanizing, Mechanical galvanizing, Copper plating, Teflon, Special coating for marine engine parts, etc. |
|
Standard Specifications |
All items are produced in strict accordance with industry standards or client-specific requirements. |
China double stud boltrefer to a cylindrical fastener with threads at both ends. Both ends of the thread need to be matched with nuts and washers. It is used for two connected parts with through holes and is used for the fixed link function of connecting machinery.Studs are widely used in electric power, the chemical industry, oil refining, valves, railways, bridges, automobile and motorcycle parts, machinery, steel structures, hanging towers, large buildings, etc.All items are produced in strict accordance with industry standards or client-specific requirements.
Specification of double sided threaded stud
|
Thread Specification Range (mm) |
M12-M300 |
|
Maximum Processing Length (m) |
≤10m |
|
Strength Range |
≤1450MPa |
|
Linear tolerance control accuracy |
|
|
Surface roughness |
|
|
Geometric Tolerance |
thread coaxially at both ends ≤0.02mm |
|
Friction Coefficient |
μtot, μb, μth |
|
Surface Treatment |
Black oxide, Phosphating, Flake zinc-aluminum coating (Dacromet, Geomet), HDG (Hot dip galvanizing), Electro galvanizing, Mechanical galvanizing, Copper plating, Teflon, Special coating for marine engine parts, etc. |
|
Standard Specifications |
All items are produced in strict accordance with industry standards or client-specific requirements. |
Send product request
Other supplier products
 |
Blade Bushings | Blade bushingsare used in the wind power industry and are pre-buried at the root of the blade. They are the key components for the reliable connec... |
 |
Hydraulic Nuts | Hydraulic nutare used for bolts that need to be disassembled frequently, pre-tightening of super-large bolts, and locking of large workpieces. T... |
 |
Hexagon Nuts | Hexagon shaped nutare hexagonal and internally threaded. It is used in conjunction with bolts, studs, and screws to connect and fasten parts. ... |
 |
Spring Washers | China spring washerare suitable for parts that are frequently assembled and disassembled, increasing the friction between nuts and bolts, and playi... |
 |
JNZC Nuts &. Washers | Nuts are tightly connected with the bolt of the same specification through the inner thread. Washers are used between the supporting surface of ... |
