Double End Studs
China double stud boltrefer to a cylindrical fastener with threads at both ends. Both ends of the thread need to be matched with nuts and washers. It is used for two connected parts with through holes and is used for the fixed link function of connecting machinery.Studs are widely used in electric power, the chemical industry, oil refining, valves, railways, bridges, automobile and motorcycle parts, machinery, steel structures, hanging towers, large buildings, etc.All items are produced in strict accordance with industry standards or client-specific requirements.
Specification of double sided threaded stud
|
Thread Specification Range (mm) |
M12-M300 |
|
Maximum Processing Length (m) |
≤10m |
|
Strength Range |
≤1450MPa |
|
Linear tolerance control accuracy |
|
|
Surface roughness |
|
|
Geometric Tolerance |
thread coaxially at both ends ≤0.02mm |
|
Friction Coefficient |
μtot, μb, μth |
|
Surface Treatment |
Black oxide, Phosphating, Flake zinc-aluminum coating (Dacromet, Geomet), HDG (Hot dip galvanizing), Electro galvanizing, Mechanical galvanizing, Copper plating, Teflon, Special coating for marine engine parts, etc. |
|
Standard Specifications |
All items are produced in strict accordance with industry standards or client-specific requirements. |
China double stud boltrefer to a cylindrical fastener with threads at both ends. Both ends of the thread need to be matched with nuts and washers. It is used for two connected parts with through holes and is used for the fixed link function of connecting machinery.Studs are widely used in electric power, the chemical industry, oil refining, valves, railways, bridges, automobile and motorcycle parts, machinery, steel structures, hanging towers, large buildings, etc.All items are produced in strict accordance with industry standards or client-specific requirements.
Specification of double sided threaded stud
|
Thread Specification Range (mm) |
M12-M300 |
|
Maximum Processing Length (m) |
≤10m |
|
Strength Range |
≤1450MPa |
|
Linear tolerance control accuracy |
|
|
Surface roughness |
|
|
Geometric Tolerance |
thread coaxially at both ends ≤0.02mm |
|
Friction Coefficient |
μtot, μb, μth |
|
Surface Treatment |
Black oxide, Phosphating, Flake zinc-aluminum coating (Dacromet, Geomet), HDG (Hot dip galvanizing), Electro galvanizing, Mechanical galvanizing, Copper plating, Teflon, Special coating for marine engine parts, etc. |
|
Standard Specifications |
All items are produced in strict accordance with industry standards or client-specific requirements. |
在线联系供应商
Other supplier products
 |
Blade Bushings | Blade bushingsare used in the wind power industry and are pre-buried at the root of the blade. They are the key components for the reliable connec... |
 |
Flange Bolts | The flange locking boltis an integral bolt composed of a hexagon head, a flange, and a screw. According to the different positions of the china ... |
 |
Hexagon Fit Bolts | The front thread of square head shoulder boltis used for connection, and the back end without thread is used for positioning. It can withstand late... |
 |
Hexagon Socket-head Cap Bolts | The outer edge of the head of the china hexagon socket boltis round, and the middle is a recessed hexagon. High-strength hex socket button head ... |
 |
Full Threaded Studs | The threads of fully threaded studs are distributed on the surface of the whole bolt, which is used to connect parts with large thicknesses and com... |
