Rack shelf forming machine
Technical parameters
Raw material: Q235,galvanized steel plate
Steel plate thickness: 2.0mm
Steel plate width: about 235mm
Steel coil ID: Ф508±10mm
Steel coil OD: ≤Ф1300mm
Coil weight: ≤3000 kg
Set length: 2000~6000mm
Machine operation speed: ~6m/min
Electric power: 380V±10%;50HZ
Production line workflow
Decoiling→Leveling→Shear and butt welding→Loop →Material feeding →Punching→Loop→Roll forming→ Straightening→Cutting off→Finished product running out →
Other supplier products
|
|
305 c purline forming machine |
Technical ParametersSuitable material Galvanization steel sheet or hr steel strip;Material Spec finds the confirmed profile drawing.Thickness 2&a... |
|
|
146 Roll Forming Machine for ridge cap |
Main Technical Parameter1 Suitable material Type Colored coating steelThickness (mm) 0.55Yield strength (Mpa) 345MpaWidth (mm) 4002 Forming Speed... |
|
|
Rack shelf forming machine |
Technical parametersRaw material: Q235,galvanized steel plateSteel plate thickness: 2.0mmSteel plate width: about 235mmSteel coil ID: Ф508±... |
|
|
2 Waves Guardrail Roll Forming Machine |
Technical parametersRaw Material: Galvanized Sheet, Hot Rolled PlateRaw Material Yield Strength: 235MpaRaw Material Thickness: 2.0 – 4.0mmR... |
|
|
Roofing machine |
Roofing machine is mainly used in the production of colored steel sheets. The machine is artistically made and transmits smoothly at a low noise.... |
All supplier products
Same products
