LFP Module
The structure of LFP modulemainly has a banding structure. Due to the high flexibility of banding modules, the quantity in series and parallel of lithium battery cells can be determined according to the demand of customers. Generally, Lithium Storage offers the following LFP battery module:
Flexibility in series and parallel 50~302Ah lithium battery cells, 1P8S or 1P4S LFP modules are common types.
Heating pad is optional
Connector type and definition can be customized
LFP Battery Module or Cell with Nut/Screw Terminals-Pack?
For improving production efficiency, the positive and negative terminals of lithium-ion batteries have been upgraded from screw-hole terminals to flat welding terminals. The new generation lithium batteries require welding equipment for battery connections. Sorting out the demand from the international market, many international customers still prefer to choose cells that screws or bolts can connect than flat welding terminals. The following points are pointed out by customers:
The total pack or module needs to be replaced once one cell of the battery pack fails in the operation. As well as, there is a dimension limit on module size for different application cases from the local market, and there is low feasibility of using the same module to meet all pack requirements. Therefore, customers prefer cells with nut/screw terminals for the flexibility of pack installation.
However, as a professional lithium-ion battery manufacturer in China, Lithium Storage recommends customers select LFP battery modules instead of cells with nut/screw terminals because of their high structural stability and welding reliability.
LFP Banding Module Structure
LFP Banding Module Structure
The LFP battery module has high flexibility in production due to its structural characteristic.
lithium battery cells are connected by an aluminum busbar via laser welding.
Banding belt structure, the upper part is a steel belt and the lower part is a plastic belt.
M4 hole on the aluminum busbar is applied to fix sampling wiring.
Bolt connection for the positive and negative output of modules
Standardized mold plastic end plate design
If you are looking for a reliable lithium ion battery factory, don't hesitate to contact us!
Send product request
Other supplier products
 |
Deep Cycle LiFePO4 280Ah Battery | This 280ah lithium deep cycle battery series belongs to the GB 71173 series of dimension format 6000 times outstanding cycle life with maximum rel... |
 |
NCM102Ah 1P6S VDA Module | NCM102Ah 1P6S VDA Module 355 VDA frame welding lithium battery module. High-quality standard of production and performance meeting supply requi... |
 |
LiFePO4 302Ah Battery | Belong to GB 71173 series of dimension format Upgrade from LFP280Ah and higher energy density under similar dimension with LFP280Ah 4000times... |
 |
LiFePO4 280Ah Battery | LiFePO4 280Ah Cells Belong to GB 71173 series of dimension format Approximately same dimension with long cycle LFP280Ah and LFP302Ah 4000tim... |
 |
36V Lithium-ion Forklift Battery | Smart FLT Series: Forklift Lithium Battery 38.4V824Ah for Crown RMD6095S-32 400 Remote&Onsite Product Support GPS&GPRS function ... |
Same products
|
|
LFP Module | Seller: Lithium Storage Co., Ltd. | The structure of LFP modulemainly has a banding structure. Due to the high flexibility of banding... |
 |
Camera battery 160wh | Seller: Beijing HDY Technology Development Co.,Ltd | 电影摄像机电池 CAMERA BATTERY 名称 Product 锂离子电池LithiumBattery 型号 Model HDY-98AN HDY-130... |
 |
Camera battery 160wh | Seller: Beijing HDY Technology Development Co.,Ltd | 电影摄像机电池 CAMERA BATTERY 名称 Product 锂离子电池LithiumBattery 型号 Model HDY-98AN HDY-130... |
 |
Professional Alexa use 26V camera battery | Seller: Beijing HDY Technology Development Co.,Ltd | 型号：HDY-230 电压：26V 容量：230W/8.7AH专用艾丽莎摄像机 工作温度：-30---50度 重量：1.35KG 尺寸：170*101*63MM Professional Ale... |
 |
Video light/Camera battery | Seller: Beijing HDY Technology Development Co.,Ltd |
