EPS Automatic Shape Moulding Machine
Main Features1.Combined with high-quality features in Europe, Japan and China Taiwan machines, used widely2.Foam products have low moisture content. Low energy consumption and short production cycle time. Perfect stabilization of size3.Interchangeable various types of moulds, equipment compatibility, saving muld cost4.The frame is welded by quality steel, high strength and good stability5.Rack failure annealed after welding heat treatment. Using imported CNC machining center. The underlying fine uses sand-blasting, galvanizing and the overall surface painted, high corrosion resistance6.Using advanced multi-cylinder hydraulic clamping systems, high clamping speed and locking strength7.Using advanced central energy distributor, for good steam pressure balance and stability8.Efficient vacuum cooling system with spray mozzle, independent of the drainage system, greatly reducing vacuum time9.Pressure feed, advanced sensors to controal the feeding amount and density10.Automatic computer control system, color touch-screen control, easy to operateItemUnitType/Technical Data CH CX1210 BBCH CX1412 BBCH CX1513 BBCH CX1715 BBCH CX1816 BBPlatform Sizemm1200×10001400×12001500×13001700×15001800×1600Mould Demensionmm1030×800 ×4001230×1030×4001330×1130×4001530×1130×4001630×1430×400Rear window areamm1050×8501250×10501350×11501550×13501650×1450SteamSteam Inlet sizemmDN80DN80DN80DN100DN100Mould inlet sizemmDN40DN40DN40DN40DN40Working Pressurekg/cmConsumptionkg/cycle2-3.52-3.02-3.02-3.52-3.5Cooling WaterWater Inlet sizemmDN80DN80DN80DN80DN80Mould inlet sizemmDN25DN25DN25DN25DN25Working Pressurekg/cm23.0-4.03.0-4.03.0-4.03.0-4.03.0-4.0Temperature℃40.0-50.040.0-50.040.0-50.040.0-50.040.0-50.0Consumptionkg/cycle15.0-30.015.0-30.015.0-30.015.0-30.015.0-30.0Compressed AirInlet sizemmDN80DN80DN80DN80DN80Consumptionm3/cycle0.015-0.0200.015-0.0200.015-0.0200.015-0.0200.015-0.020Pressurekg/cm24.0-5.04.0-5.04.0-5.04.0-5.04.0-5.0vacuum coolerInlet sizemmDN25DN25DN25DN25DN25consumptionm3/cycle1.5-3.01.5-3.01.5-3.01.5-3.01.5-3.0temperature℃25.0-35.025.0-35.025.0-35.025.0-35.025.0-35.0Pressurekg/cm210.0-20.010.0-20.010.0-20.010.0-20.010.0-20.0molding timeS/model38.0-55.038.0-60.038.0-60.038.0-80.038.0-80.0Drainage pipe interfaceMMDN80DN80DN80DN80DN80installed powerKW12.512.512.512.512.5Overall Dimension (LxWxH)M5.2*2.1*3.755.2*2.3*3.955.2*2.4*4.055.2*2.6*4.255.2*2.7*4.35Machine WeightKg
Other supplier products
|
|
Steam Accumulator |
Specifications of :1. Tanks: carbon steel, balloon: EPDM rubber2. The maximum working pressure: 16 bar3. Working temperature range:-100 °C4. The fi... |
|
|
Steam Boiler |
WNS industrial steam boilercapacity:1-20TThe thermal efficiency:>=95%Applicable fuel: Natural gas, light oil, heavy oil, gas, etcRange of applicati... |
|
|
Energy-efficient Automatic Shape Moulding Machine |
Main Features1.Automaitc computer control system,color touch-screen control, easy to operate2.Foam products have low moisture content. Low energy c... |
|
|
EPS Automatic Shape Moulding Machine |
Main Features1.Combined with high-quality features in Europe, Japan and China Taiwan machines, used widely2.Foam products have low moisture content... |
|
|
Vacuum Block Moulding Machine |
Main features1.High quality steel welding and heat treatment, high mechanical strength, can withstand high power density expansion products2.Mould ... |
All supplier products
Same products
