Individual Driver Controlled Rod Breakdown Machine
1-Application:
Rod Breakdown Machine with Individual Drives is used for drawing copper and aluminum or alloy wire with high speed.
2-Main feature:
1)Individual drives
2)Inlet wire: 8 or 9.5mm, outlet wire: 1.5~5.0mm.
3)Finished product: Round wire, S shape wire, Z shape wire, trapezoidal type wire.
3-Parameters:
|
Machine type |
LSD450/11 |
|
|
Drawing Capstan Dia.(mm) |
φ450 |
|
|
11 |
||
|
Inlet Dia.(mm) |
Copper |
φ8 |
|
AL, AlAlloy |
φ9.5 |
|
|
Outlet Dia. (mm) |
Copper |
φ1.5-φ4.2 |
|
AL, Al Alloy |
φ2.2-φ5.0 |
|
|
25 |
||
|
Single Motor Power (KW) |
37 / 55 (AC) |
|
|
Capstan Arrangement |
Horizontal Type |
|
|
Lubrication Type |
Full Immersion |
|
|
Take-up Type (Optional) |
Double Take-up/ Single Take-up / Coiler |
|
|
Optional Equipment for copper wire |
Horizontal continuous annealing |
|
|
On-line Continuous Annealing Device |
||
|
Type |
450T |
450TB |
|
Annealing Wire Dia.( mm ) |
φ1.2 ~ 3.5 |
φ1.2~4.2 |
|
Annealing Voltage ( V ) |
0 ~ 60 |
0 ~ 60 |
|
Annealing Current ( A ) |
0~6000A (DC) |
0~5000A (AC) |
|
( m / s) |
25 m/s |
|
4-Advantage:
1)Every drum is run by single motor with drivers.
2)Door up and down automatically make threading easily.
3)Tension rate can be adjustable according to different raw material.
4)Quick die change system.
5)Full immersion guarantee the wire's cooling and lubrication.
6)Drum box body is separated with transmit part, mechanical labyrinth seal type,to avoid drawing oil and gear oil mixed.
7)Three section AC annealing, full digital control, make wire soft with good quality.
Send product request
Other supplier products
 |
6M Annealing and Tinning Machine | 1-Application: This machineis special used for annealing and tinning 40 to 60 copper wires 0.08-0.32 mm at the same time.Finished wire is can be w... |
 |
MultiWire Drawing Machine for 4 wires | 1-Application: This Multi Wire Copper Wire Drawing Machine has four wires and is mainly used for drawing copper wire to 0.25-0.70 mm wire. 2-Ma... |
 |
Intermediate Wire Drawing Machine with Online Annealing | Application:Intermediate Copper Wire Drawing Machine with Annealeris used for drawing and annealing copper wire from 3.0mm to 0.4-1.6mm.Outlet wire... |
|
|
Individual Driver Controlled Rod Breakdown Machine | 1-Application: Rod Breakdown Machine with Individual Drives is used for drawing copper and aluminum or alloy wire with high speed. 2-Main feature... |
 |
Super Fine Wire Drawing Machine | Application: This machine is special used for drawing wire 0.04-0.15mm. Finished wire is wound by plastic bobbin. Main feature: Adoptin... |
Same products
 |
screen-casting Bluetooth speaker | Seller: 860961 | Key Selling Points: Screen Mirroring：Cast music videos, floating lyrics and any content direct... |
 |
electric wire rope hoist supplier | Seller: 854165 | electric wire rope hoist supplier Electric Hoist Electric Wire Rope Hoist Supplier An el... |
 |
DO-201W Internet of Things DO&TEMP Controller | Seller: Kelilong Electron Co.,Ltd | Technology parameters: Range DO 0 ~16.5mg/L TEMP 0～50℃ ... |
 |
Bi Concave Lens | Seller: Changchun Sunday Optics Co., Ltd. | Bi Concave Lens The double concave lenses with the negative focal length, these lenses are used ... |
 |
Achromatic Doublet Lens | Seller: Changchun Sunday Optics Co., Ltd. | Achromatic Doublet Lens Achromatic lenses are cemented with two lenses mainly used to reduced va... |
