sell JMY609 hf rfid module,USB(HID)
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the JMY609 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. There are 2 SAM card slots in the reader. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job. Qualifications:
• PCD: NXP RC522, RC523
• Working frequency: 13.56MHz
• RF standard: ISO14443A, ISO14443B
• Operating distance: 80mm (Mifare One, typical distance)
• SAM card slot: 2 slots, (supported ISO7816 T=0 and T=1)
• Interface: USB (HID standard)
• Power supply: DC5V
• Power consumption: 110mA
• Dimension: 85mm×58mm
• Weigh: about 100g
• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
Other supplier products
|
|
sell 13.56MHZ rfid module,ISO15693,USB(HID) |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to r... |
|
|
sell JMY601 hf rfid module,UART, |
JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactl... |
|
|
sell MR790 13.56MHZ rfid reader,USB PC/SC |
MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC car... |
|
|
Sell 13.56MHz HF RFID mini reader/writer module JMY505 with IIC&UART interface |
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of con... |
|
|
offer hf rfid module,EMV2000,EMV2010,50ohm antenna |
JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards.... |
All supplier products
Same products
