Rotary Drum Dryer
PrincipleGT model rotary drum dryer is a kind of indirect heating dryer in continuous production. Raw material fed from top or bottom of drum and stick on the drum. Filling steam or thermal oil inside the drum,Website:, the heat then transferred to raw material, thus raw material could get dried. Flake form dried product will be scraped off, and preliminarily crushed as well as transported by screw conveyor.Evaporated moisture will be sucked out by exhausting fan.The dryer is suitable for liquid or paste form raw material with certain viscosity.Features(1)High efficiency. Almost all of the heat could be used on drying, drying efficiency could reach 80-90%.(2)Widely used. The dryer is available for drying the raw material with large moisture content range. We could get the best drying effect by adjust feeding rate, thickness of pavement, drum rotating speed, feeding form etc.(3)Short retention time. Drying time only remains 10-15 seconds, it is suitable for heat sensitive material.Technical ParametersSpecification / Parameterø800*600ø1000*2000ø1200*2000ø1400*2400ø1600*2400NoteDriving motor power (kw)345.57.511Please note if use steam as heating resourceHeating area(m2)1.56.27.510.512Rotating speed of drum (r/min)0.5-5Heating resourceThermal oil, steam, hot waterFeeding formUpward or downward
Other supplier products
|
Rotary Kiln Dryer |
DescriptionWet raw material is fed into dryer by screw feeder,Website:, and it will be distributed by rising board inside. Dispersed raw material h... |
|
Triple Pass Rotary Kiln Dryer |
DescriptionTriple pass rotary kiln dryer is a kind of modified kiln dryer. There are three layers of drying chamber,Website:, raw material is fed i... |
|
Spray Cooler |
PrincipleMelted solid is fed into spray tower by high pressure pump,Website:, the mist form melted solid will contact with fresh air (or cooling ai... |
|
Oily Sludge Harmless Treatment System |
Brief IntroductionChanging the physical & chemical properties and components of the sludge particles,Website:, destroying it’s colloidal structure,... |
|
Spin Flash Dryer |
PrincipleHot air enters into drying chamber from the bottom of dryer with appropriate spouting speed. Raw material is crushed by dis-integrator and... |
All supplier products
Same products