Rotary Drum Dryer
PrincipleGT model rotary drum dryer is a kind of indirect heating dryer in continuous production. Raw material fed from top or bottom of drum and stick on the drum. Filling steam or thermal oil inside the drum,Website:, the heat then transferred to raw material, thus raw material could get dried. Flake form dried product will be scraped off, and preliminarily crushed as well as transported by screw conveyor.Evaporated moisture will be sucked out by exhausting fan.The dryer is suitable for liquid or paste form raw material with certain viscosity.Features(1)High efficiency. Almost all of the heat could be used on drying, drying efficiency could reach 80-90%.(2)Widely used. The dryer is available for drying the raw material with large moisture content range. We could get the best drying effect by adjust feeding rate, thickness of pavement, drum rotating speed, feeding form etc.(3)Short retention time. Drying time only remains 10-15 seconds, it is suitable for heat sensitive material.Technical ParametersSpecification / Parameterø800*600ø1000*2000ø1200*2000ø1400*2400ø1600*2400NoteDriving motor power (kw)345.57.511Please note if use steam as heating resourceHeating area（m2）1.56.27.510.512Rotating speed of drum (r/min)0.5-5Heating resourceThermal oil, steam, hot waterFeeding formUpward or downward
Other supplier products
|
|
|
DescriptionClean hot air enter fluid bed dryer through air distributor. The wet raw material fed from feeder forms the fluidizing state by hot air.... |
|
|
|
PrincipleWet raw materials are fed continuously on the first hot plate on the top of dryer. Raw materials then will be turned and agitated under th... |
|
|
|
DescriptionWet raw material is fed into dryer by screw feeder,Website:, and it will be distributed by rising board inside. Dispersed raw material h... |
|
|
|
DescriptionUnder the negative working pressure by exhausting fan,Website:, fresh air will be firstly filtered during passing through air filter, an... |
|
|
|
DescriptionZPG model spray dryer is specially designed for the raw material which is easy to stick on the chamber and has low melting point. It is ... |
供应产品
Same products
